Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS 3100 TAIDA TAIWAN
TAITALAC®
Used for luggage、Toolbox、Locomotive parts、Low temperature products、Helmet、Bus box、heel、Controlled pipe fittings,、Application in the automo、Footwear
Ultra high impact resista、Widely used for extrusion、Ultra high impact strengt、Good processability、Excellent hot forming
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TAIDA TAIWAN/3100 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,6.35mm | ASTM D256 | 450 J/m |
| 23°C,3.18mm | ASTM D256 | 490 J/m |
| hardness | Test Condition | Test Method | TAIDA TAIWAN/3100 |
|---|---|---|---|
| Rockwell hardness | R计秤,23°C | ASTM D785 | 100 |
| Basic performance | Test Condition | Test Method | TAIDA TAIWAN/3100 |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.3 wt% | |
| melt mass-flow rate | 200℃/5kg | ASTM D-1238 | 8.0 g/10min |
| density | ASTM D-792 | 1.03 |
| Mechanical properties | Test Condition | Test Method | TAIDA TAIWAN/3100 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃1/2" | ASTM D-256 | 38 (7.0) kg.cm/cm(ft.1b/in) |
| Rockwell hardness | 100 | ||
| elongation | 断裂,23°C,3.18mm | ASTM D638 | 90 % |
| flexural coefficient | 23℃ 2.8mm/min | ASTM D-790 | 20000 kg/cm |
| 23℃ 2.8mm/min | ASTM D-790 | 290000 psi | |
| tensile strength | 1/8"，断裂 | ASTM D-638 | 4300 kg/cm |
| Break,23°C,3.18mm | ASTM D638 | 27.6 Mpa | |
| bending strength | 23℃ 2.8mm/min | ASTM D-790 | 600 kg/cm |
| tensile strength | 23℃，屈服 | ASTM D-638 | 350 kg/cm |
| Impact strength of cantilever beam gap | 23℃1/8" | ASTM D-256 | 53 (9.8) kg.cm/cm(ft.1b/in) |
| tensile strength | 屈服,23°C,3.18mm | ASTM D638 | 32.4 Mpa |
| bending strength | 屈服,23°C | ASTM D790 | 58.6 Mpa |
| elongation at break | 1/8" | ASTM D-638 | 50 % |
| Flexural modulus | 23°C | ASTM D790 | 2000 Mpa |
| bending strength | 23℃ 2.8mm/min | ASTM D-790 | 8500 psi |
| tensile strength | 23℃，屈服 | ASTM D-638 | 5000 psi |
| 1/8"，断裂 | ASTM D-638 | 300 psi |
| flammability | Test Condition | Test Method | TAIDA TAIWAN/3100 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | TAIDA TAIWAN/3100 |
|---|---|---|---|
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 0.80 g/10min |
| Shrinkage rate | MD | ASTM D955 | <0.40 % |
| Water absorption rate | 24hr | ASTM D570 | <0.30 % |
| Shrinkage rate | ASTM D-955 | 0.4 % | |
| density | ASTM D792 | 1.03 g/cm³ | |
| melt mass-flow rate | 220°C/10.0kg | ASTM D1238 | 8.0 g/10min |
| Thermal performance | Test Condition | Test Method | TAIDA TAIWAN/3100 |
|---|---|---|---|
| vicat | ASTM D15254 | 102 °C | |
| Heat distortion temperature | 未退火，HDT | ASTM D-1525 | 85(185) ℃(F) |
| vicat | ASTM D-1525 | 100 °C | |
| Heat distortion temperature | 1.8MPa,未退火,12.7mm，HDT | ASTM D648 | 85.0 °C |
| UL flame retardant rating | UL 94 | HB |
Contact Us
Get App
Top