Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPX TPX-PBT-01022 USA TPC
--
--
Lubricated
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | USA TPC/TPX-PBT-01022 |
|---|---|---|---|
| Rockwell hardness | R -Sale | ASTM D-2240 | 70 |
| thermal performance | Test Condition | Test Method | USA TPC/TPX-PBT-01022 |
|---|---|---|---|
| Dielectric strength | ASTM D149 | 20 kV/mm | |
| Electrical Properties | 体积电阻率 | ASTM D-257 | 1E+16 ohm·cm |
| Hot deformation temperature | 1.8 MPa, Unannealed | ASTM D-648 | 87.8 °C |
| mechanical properties | Test Condition | Test Method | USA TPC/TPX-PBT-01022 |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 3450 MPa | |
| bending strength | Yield | ASTM D-790 | 89.6 MPa |
| elongation | Break | ASTM D-638 | 23.0 % |
| tensile strength | Yield | ASTM D-638 | 46.9 MPa |
| Physical properties | Test Condition | Test Method | USA TPC/TPX-PBT-01022 |
|---|---|---|---|
| density | ASTM D-792 | 1.46 g/cm³ | |
| Shrinkage rate | ASTM D-792 | 1.46 g/cm³ | |
| Water absorption rate | 24 hr | ASTM D-570 | 0.20 % |
| impact performance | Test Condition | Test Method | USA TPC/TPX-PBT-01022 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18 mm | ASTM D-256 | 80.1 J/m |
| flammability | Test Condition | Test Method | USA TPC/TPX-PBT-01022 |
|---|---|---|---|
| UL flame retardant rating | 1.59 mm | UL 94 | HB |