Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PVC Aurora PVC AP1085 Series AAMA UK Aurora Plastics
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | UK Aurora Plastics/Aurora PVC AP1085 Series AAMA |
|---|---|---|---|
| Impact strength of cantilever beam gap | 22°C | ASTM D256 | 980 J/m |
| Dart impact | 22°C,Extrudedat370to380°Fmelttemperature2 | ASTM D4226 | >120 J/cm |
| 22°C,Extrudedat370to380°Fmelttemperature3 | ASTM D4226 | >120 J/cm |
| hardness | Test Condition | Test Method | UK Aurora Plastics/Aurora PVC AP1085 Series AAMA |
|---|---|---|---|
| DurometerHardness | ShoreD,22°C | ASTM D2240 | 75to81 |
| Mechanical properties | Test Condition | Test Method | UK Aurora Plastics/Aurora PVC AP1085 Series AAMA |
|---|---|---|---|
| bending strength | 22°C | ASTM D790 | 80.0 MPa |
| Tensile modulus | 22°C | ASTM D638 | 3010 MPa |
| Flexural modulus | 22°C | ASTM D790 | 2650 MPa |
| tensile strength | 屈服,22°C | ASTM D638 | 46.2 MPa |
| flammability | Test Condition | Test Method | UK Aurora Plastics/Aurora PVC AP1085 Series AAMA |
|---|---|---|---|
| burning rate | (ATB)Avg.TimeofBurning:2.54mm | ASTM D635 | <5.0 sec |
| (AEB)Avg.ExtentofBurning | ASTM D635 | <5.00 mm |
| physical property | Test Condition | Test Method | UK Aurora Plastics/Aurora PVC AP1085 Series AAMA |
|---|---|---|---|
| PVC unit classification | ASTM D4216 | 1-43344-12 | |
| density | ASTM D792 | 1.45to1.47 g/cm³ |
| Thermal performance | Test Condition | Test Method | UK Aurora Plastics/Aurora PVC AP1085 Series AAMA |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 70.6 °C |
| Linear coefficient of thermal expansion | MD：22°C | ASTM D696 | 5.2E-05 cm/cm/°C |
Contact Us
Get App
Top