Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP PM 240 AT Spain Repsol
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | Spain Repsol/PM 240 AT |
|---|---|---|---|
| tensile strength | ISO 527-2 | 35 MPa | |
| Shore hardness | ISO 868 | 76 | |
| Impact strength of cantilever beam gap | 0°C | ISO 180 | 3.3 kJ/m² |
| Flexural modulus | ISO 178 | 2800 MPa | |
| Tensile strain | ISO 527-2 | 5.0 % | |
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 5.0 kJ/m² |
| physical property | Test Condition | Test Method | Spain Repsol/PM 240 AT |
|---|---|---|---|
| melt mass-flow rate | 230°C/2.16 kg | ISO 1133 | 3.0 g/10 min |
| Shrinkage rate | ISO 2577 | 0.9 % | |
| density | ISO 1183 | 1.04 g/cm³ |
| Thermal performance | Test Condition | Test Method | Spain Repsol/PM 240 AT |
|---|---|---|---|
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 120 °C |
| vicat | 0.45 MPa, 未退火 | ISO 306/A120 | 154 °C |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 66 °C |
| vicat | 1.8 MPa, 未退火 | ISO 306/B120 | 98 °C |
Contact Us
Get App
Top