Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Homopolymer Tecolen® HP30 NL XA80 EUROTEC TURKEY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EUROTEC TURKEY/Tecolen® HP30 NL XA80 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 2.5 kJ/m² |
| 23°C | ISO 180/1A | 3.5 kJ/m² |
| Electrical performance | Test Condition | Test Method | EUROTEC TURKEY/Tecolen® HP30 NL XA80 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 0 |
| Surface Resistivity | IEC 60093 | 1E+15 ohms |
| Mechanical properties | Test Condition | Test Method | EUROTEC TURKEY/Tecolen® HP30 NL XA80 |
|---|---|---|---|
| Tensile modulus | 23°C | ISO 527-2 | 2500 MPa |
| tensile strength | 断裂,23°C | ISO 527-2 | 25.0 MPa |
| flammability | Test Condition | Test Method | EUROTEC TURKEY/Tecolen® HP30 NL XA80 |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-2 |
| Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 875 °C |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | EUROTEC TURKEY/Tecolen® HP30 NL XA80 |
|---|---|---|---|
| density | ISO 1183 | 1.05 g/cm³ |
| Thermal performance | Test Condition | Test Method | EUROTEC TURKEY/Tecolen® HP30 NL XA80 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 165to170 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 60.0 °C |
Contact Us
Get App
Top