Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPA UX06032-BK83015 SABIC INNOVATIVE US
LNP™ THERMOCOMP™
Mechanical parts,consumer goods
Thermal stability,Carbon fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/UX06032-BK83015 |
---|---|---|---|
0.45MPa, unannealed, 64.0mm span | ISO 75-2/Bf | 275 °C | |
1.8MPa, unannealed, 64.0mm span of | ISO 75-2/Af | 258 °C | |
Linear coefficient of thermal expansion | MD:23to60°C | ISO 11359-2 | 2.1E-05 cm/cm/°C |
TD:23to60°C | ISO 11359-2 | 5.4E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/UX06032-BK83015 |
---|---|---|---|
Bending modulus | ISO 178 | 9900 Mpa | |
bending strength | ISO 178 | 200 Mpa | |
Tensile modulus | ISO 527-2/1 | 11400 Mpa | |
Tensile strain | Break | ISO 527-2/5 | 2.1 % |
tensile strength | Break | ISO 527-2/5 | 130 Mpa |
Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/UX06032-BK83015 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | V |
Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/UX06032-BK83015 |
---|---|---|---|
Shrinkage rate | MD1 | Internal Method | 0.20-0.30 % |
Water absorption rate | 23°C,24hr | ISO 62 | 0.23 % |
impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/UX06032-BK83015 |
---|---|---|---|
Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 5.0 kJ/m² |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 40 kJ/m² |
flammability | Test Condition | Test Method | SABIC INNOVATIVE US/UX06032-BK83015 |
---|---|---|---|
Burning wire flammability index | 1.50mm | IEC 60695-2-12 | 960 °C |
Hot filament ignition temperature | 0.800mm | IEC 60695-2-13 | 825 °C |
3.00mm | IEC 60695-2-13 | 850 °C | |
1.60mm | IEC 60695-2-13 | 825 °C | |
UL flame retardant rating | 0.800mm | UL 94 | V-0 |