Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Epoxy Thermoset Plastics EP-236 Thermoset, Lord Chemical Products
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics EP-236 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 20 J/m |
| hardness | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics EP-236 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 93 |
| Mechanical properties | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics EP-236 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 3.6 % |
| tensile strength | 屈服 | ASTM D638 | 63.4 MPa |
| Electrical performance | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics EP-236 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 4E+15 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.010 |
| dielectric constant | 1MHz | ASTM D150 | 3.70 |
| thermosetting | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics EP-236 |
|---|---|---|---|
| Thermosetting components | 硬化法 | 按重量计算的混合比:1.0 | |
| stripping time | 100°C | 180to360 min | |
| Thermosetting components | 树脂 | 按重量计算的混合比:1.0 | |
| Thermosetting mixed viscosity | 25°C | ASTM D2393 | 16000 cP |
| flammability | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics EP-236 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics EP-236 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.030 % |
| density | ASTM D792 | 1.60 g/cm³ |
Contact Us
Get App
Top