Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PES 3300 PREM SOLVAY USA
VERADEL®
Food service sector、currency
Flame retardant、High temperature resistan、Good dimensional stabilit
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | SOLVAY USA/3300 PREM |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2690 Mpa | |
| elongation | 屈服 | ASTM D638 | 6.5 % |
| Impact strength of cantilever beam gap | 23℃ | ASTM D256 | 53.4 J/m |
| bending strength | ASTM D790 | 125 Mpa | |
| tensile strength | 23℃ | ASTM D638 | 88.9 MPa |
| Flexural modulus | ASTM D790 | 2620 Mpa | |
| tensile strength | ASTM D638 | 88.9 Mpa | |
| bending strength | 23℃ | ASTM D790 | 114 MPa |
| Electrical performance | Test Condition | Test Method | SOLVAY USA/3300 PREM |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 2.2E-03 |
| 60Hz | ASTM D150 | 1.7E-03 | |
| dielectric constant | 60Hz | ASTM D150 | 3.51 |
| Volume resistivity | ASTM D257 | 1.7E+15 ohms·cm | |
| dielectric constant | 1kHz | ASTM D150 | 3.50 |
| Dissipation Factor | 1MHz | ASTM D150 | 5.6E-03 |
| Relative track index | ASTM D3638 | 150 V | |
| dielectric strength | ASTM D149 | 15 KV/mm | |
| dielectric constant | 1MHz | ASTM D150 | 3.54 |
| 23℃，60Hz | ASTM D150 | 3.20 |
| flammability | Test Condition | Test Method | SOLVAY USA/3300 PREM |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | SOLVAY USA/3300 PREM |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.60 % |
| Water absorption rate | 24hr | ASTM D570 | 0.50 % |
| melt mass-flow rate | 380°C/2.16kg | ASTM D1238 | 30 g/10min |
| Water absorption rate | 30天 | ASTM D570 | 1.9 % |
| melt mass-flow rate | 2.16kg@380℃ | ASTM D1238 | 16-25 g/10min |
| Thermal performance | Test Condition | Test Method | SOLVAY USA/3300 PREM |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,退火，HDT | ASTM D648 | 200 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.2E-05 cm/cm/°C |
| Glass Transition Temperature | DSC | 223 ℃ | |
| Heat distortion temperature | 1.82MPa，HDT | ASTM D648 | 195 ℃ |
| Maximum continuous use temperature | ASTM D794 | 180 ℃ | |
| Linear coefficient of thermal expansion | ASTM D696 | 0.00058 cm/cm/℃ |
Contact Us
Get App
Top