Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC TYNEC® CG300 TYNE USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TYNE USA/TYNEC® CG300 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 160 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D256 | 1200 J/m |
| Mechanical properties | Test Condition | Test Method | TYNE USA/TYNEC® CG300 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.0 % |
| Flexural modulus | ASTM D790 | 8270 MPa | |
| Tensile modulus | ASTM D638 | 8960 MPa | |
| tensile strength | 断裂 | ASTM D638 | 124 MPa |
| bending strength | ASTM D790 | 159 MPa |
| Electrical performance | Test Condition | Test Method | TYNE USA/TYNEC® CG300 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.010 |
| dielectric constant | 1MHz | ASTM D150 | 3.20 |
| dielectric strength | 3.18mm,inAir | ASTM D149 | 16 kV/mm |
| flammability | Test Condition | Test Method | TYNE USA/TYNEC® CG300 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-1 |
| 1.6mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | TYNE USA/TYNEC® CG300 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.10to0.30 % |
| Water absorption rate | 饱和 | ASTM D570 | 0.29 % |
| 24hr | ASTM D570 | 0.11 % | |
| density | ASTM D792 | 1.44 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 5.0 g/10min |
| Thermal performance | Test Condition | Test Method | TYNE USA/TYNEC® CG300 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 149 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 152 °C |
Contact Us
Get App
Top