Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC TRISTAR® PC-10FRNH PTS USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | PTS USA/TRISTAR® PC-10FRNH |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.17mm | ASTM D256 | 690 J/m |
| hardness | Test Condition | Test Method | PTS USA/TRISTAR® PC-10FRNH |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 120 |
| Mechanical properties | Test Condition | Test Method | PTS USA/TRISTAR® PC-10FRNH |
|---|---|---|---|
| elongation | 断裂,3.18mm | ASTM D638 | 75 % |
| Flexural modulus | 3.17mm | ASTM D790 | 2340 MPa |
| tensile strength | 屈服,3.17mm | ASTM D638 | 61.4 MPa |
| bending strength | 屈服,3.17mm | ASTM D790 | 96.5 MPa |
| flammability | Test Condition | Test Method | PTS USA/TRISTAR® PC-10FRNH |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | PTS USA/TRISTAR® PC-10FRNH |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.18 % |
| density | ASTM D792 | 1.23 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 12 g/10min |
| Thermal performance | Test Condition | Test Method | PTS USA/TRISTAR® PC-10FRNH |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 135 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 126 °C |
Contact Us
Get App
Top