Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Ravamid® A MF15 GR 45 Entec Polymers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Entec Polymers/Ravamid® A MF15 GR 45 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5.2 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 70 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 5.80 kJ/m² |
| 23°C | ISO 180/1A | 5.8 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Entec Polymers/Ravamid® A MF15 GR 45 |
|---|---|---|---|
| Flexural modulus | ASTMD790 | 2900 MPa | |
| elongation | 断裂 | ASTMD638 | 5.0 % |
| tensile strength | 断裂 | ASTMD638 | 45.0 MPa |
| 屈服 | ASTMD638 | 50.0 MPa |
| flammability | Test Condition | Test Method | Entec Polymers/Ravamid® A MF15 GR 45 |
|---|---|---|---|
| burning rate | 3.20mm | FMVSS302 | <100 mm/min |
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 650 °C |
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Entec Polymers/Ravamid® A MF15 GR 45 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.60to0.90 % |
| Humidity | ISO 960 | <0.20 % | |
| density | ASTMD792 | 1.24 g/cm³ |
| Thermal performance | Test Condition | Test Method | Entec Polymers/Ravamid® A MF15 GR 45 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTMD648 | 78.0 °C |
| vicat | ISO 306/B50 | 230 °C |
Contact Us
Get App
Top