Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 BKV50 LANXESS GERMANY
Durethan®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | LANXESS GERMANY/BKV50 |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 232 Mpa |
thermal performance | Test Condition | Test Method | LANXESS GERMANY/BKV50 |
---|---|---|---|
Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 220 °C |
1.80MPaAnnealed | ISO 75-2/Af | 210 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 9E-05 cm/cm/°C |
MD | ISO 11359-2 | 1.2E-05 cm/cm/°C | |
Vicat softening temperature | Melting Temperature | ISO 11357-3 | 222 °C |
mechanical properties | Test Condition | Test Method | LANXESS GERMANY/BKV50 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 15000 Mpa |
bending strength | 23°C | ISO 178 | 340 Mpa |
Elongation at Break | 23°C | ISO 527-2 | 2.70 % |
Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 17 kJ/m² |
-30°C | ISO 180/1A | 15 kJ/m² | |
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 95 kJ/m² |
23°C | ISO 179/1eU | 100 kJ/m² | |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 85 kJ/m² |
-30°C | ISO 180/1U | 85 kJ/m² | |
Tensile modulus | 23°C | ISO 527-2 | 16200 Mpa |
tensile strength | 23°C | ISO 527-2 | 215 Mpa |
Electrical performance | Test Condition | Test Method | LANXESS GERMANY/BKV50 |
---|---|---|---|
Dielectric constant | 23°C | IEC 60250 | 4.70 100HZ |
23°C | IEC 60250 | 4.20 1MHz | |
Dielectric strength | 1.00mm | IEC 60243-1 | 35 KV/mm |
Dissipation factor | 相对漏电起痕指数 | IEC 60112 | 400 V |
23°C | IEC 60250 | 0.017 1MHz | |
23°C | IEC 60250 | 0.014 100HZ | |
Volume resistivity | IEC 60093 | 7E+14 Ω.cm |
Physical properties | Test Condition | Test Method | LANXESS GERMANY/BKV50 |
---|---|---|---|
Shrinkage rate | TD2.0mm | ISO 294-4 | 0.60 % |
MD2.0mm | ISO 294-4 | 0.19 % |