Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC G-3120PH QG0409P TEIJIN JAPAN
PANLITE®
Engineering accessories、Mechanical parts with req、electrical equipment、Electronic components
Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | TEIJIN JAPAN/G-3120PH QG0409P |
|---|---|---|---|
| Temperature Index | 冲击式，厚度1.47mm | UL 746B | 120 °C |
| 电学式，厚度1.47mm | 130 °C | ||
| Heat Deflection Temperature | 负荷0.451MPa(4.6kgf/cm) | ASTM D-648 | 150 °C |
| Temperature Index | 非冲击式，厚度1.47mm | UL 746B | 130 °C |
| Heat Deflection Temperature | 负荷1.813MPa(18.6kgf/cm) | ASTM D-648 | 146 °C |
| Coefficient of Linear Thermal Expansion | 流动方向 | ASTM D-696 | 4.0 |
| 垂直方向 | 6.7 |
| Physical | Test Condition | Test Method | TEIJIN JAPAN/G-3120PH QG0409P |
|---|---|---|---|
| Moisture Absorption | 24hr，in 23℃ | ASTM D-570 | 0.16 % |
| Transmittance | 厚度3mm | ASTM D-1003 | 半透明 % |
| Rockwell Hardness | ASTM D-785 | 86 M标度 |
| Mechanical Properties | Test Condition | Test Method | TEIJIN JAPAN/G-3120PH QG0409P |
|---|---|---|---|
| Compressive Strength | ASTM D-695 | 109(1110) MPa(Kgf/cm | |
| Tensile Strength | 断裂点 | ASTM D-638 | 83(850) MPa(Kgf/cm |
| Notched Izod Impact Strength | 艾氏、带缺口厚度3.2mm | ASTM D-256 | 90(9) J/m(kgf·cm/cm) |
| Flexural Modulus | ASTM D-790 | 3530(36000) MPa(Kgf/cm | |
| Notched Izod Impact Strength | 艾氏、带缺口厚度6.4mm | ASTM D-256 | 90(9) J/m(kgf·cm/cm) |
| Flexural Strength | ASTM D-790 | 132(1350) MPa(Kgf/cm | |
| Tensile Modulus | ASTM D-638 | 4120(42000) MPa(Kgf/cm |
| Electrical Properties | Test Condition | Test Method | TEIJIN JAPAN/G-3120PH QG0409P |
|---|---|---|---|
| Dissipation Factor?(Tangent) | 10 | ASTM D-150 | 0.009 |
| Dielectric Constant | 60Hz | 3.16 | |
| 10 | 3.07 | ||
| Comparative Tracking Index | IEC 112 | 180 V | |
| Insulation failure strength | 快速加压值厚度1.6mm | ASTM D-149 | 30 KV/mm |
| Dissipation Factor?(Tangent) | 60Hz | ASTM D-150 | 0.0008 |
| Arc Resistance | ASTM D-495 | 100 sec | |
| Volume Resistivity | ASTM D-257 | 1 |
| Processing | Test Condition | Test Method | TEIJIN JAPAN/G-3120PH QG0409P |
|---|---|---|---|
| Modeling Shrinkage | 垂直方向 | ASTM D-955 | 0.4～0.6 % |
| 流动方向 | 0.3～0.5 % |
Contact Us
Get App
Top