Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA66 70G13L NC010 DUPONT USA

Zytel®

Electrical field,Electronic field,Automotive sector,Bottle cap,sporting goods,Electrical appliances

Glass fiber reinforced,high strength,High rigidity,High temperature resistan

Plastic Datasheets

Supplementary Information	Test Condition	Test Method	DUPONT USA/70G13L NC010
EmissionofOrganicCompounds		VDA277	6.00 µgC/g

thermal performance	Test Condition	Test Method	DUPONT USA/70G13L NC010
Combustibility (rate)		UL 94	HB
Glass transition temperature		ISO 11357-2	80.0 °C
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	258 °C
		1.8MPa,Unannealed	ISO 75-2/A	238 °C
		HDT	ASTM D648/ISO 75	258 ℃（℉）
Linear coefficient of thermal expansion	MD：--	ISO 11359-2	4E-05 cm/cm/°C
		MD：55to160°C	ISO 11359-2	2.6E-05 cm/cm/°C
			ASTM D696/ISO 11359	0.77 mm/mm.℃
		TD：-40to23°C	ISO 11359-2	7.7E-05 cm/cm/°C
		MD：-40to23°C	ISO 11359-2	4.2E-05 cm/cm/°C
		TD：--	ISO 11359-2	9.3E-05 cm/cm/°C
		TD：55to160°C	ISO 11359-2	1.5E-04 cm/cm/°C
Melting temperature		ISO 11357-3	262 °C
Melting temperature				262 ℃（℉）
Vicat softening temperature		ISO 306/B50	205 °C

mechanical properties	Test Condition	Test Method	DUPONT USA/70G13L NC010
Bending modulus		ISO 178	4800 Mpa
Bending modulus			ASTM D790/ISO 178	4900 kg·cm/cm(J/M)ft·lb/in
bending strength		ISO 178	190 Mpa
bending strength			ASTM D790/ISO 178	190 kg·cm/cm(J/M)ft·lb/in
Charpy Notched Impact Strength		ASTM D256/ISO 179	5 kg·cm/cm(J/M)ft·lb/in
Elongation at Break		ASTM D638/ISO 527	3 %
Tensile creep modulus	1hr	ISO 899-1	-- Mpa
Tensile creep modulus		1000hr	ISO 899-1	-- Mpa
Tensile modulus		ASTM D638/ISO 527	5500 kg/cm²(MPa)[Lb/in²]
Tensile modulus			ISO 527-2	5500 Mpa
Tensile strain	Break	ISO 527-2	3.0 %
tensile strength		ASTM D638/ISO 527	120 kg/cm²(MPa)[Lb/in²]
tensile strength		Break	ISO 527-2	120 Mpa
Wear resistance		ISO 4649	10.0 mm³

Electrical performance	Test Condition	Test Method	DUPONT USA/70G13L NC010
Dielectric strength		IEC 60243-1	25 KV/mm
Dissipation factor	1MHz	IEC 60250	0.015
Dissipation factor		100Hz	IEC 60250	0.013
Relative permittivity	100Hz	IEC 60250	3.90
Relative permittivity		1MHz	IEC 60250	3.20
Surface resistivity		IEC 60093	-- ohms
Volume resistivity		IEC 60093	>1.0E+15 ohms·cm

other	Test Condition	Test Method	DUPONT USA/70G13L NC010
characteristic			PA66.13％玻纤增强.热稳定.注塑树脂

Physical properties	Test Condition	Test Method	DUPONT USA/70G13L NC010
density		ASTM D792/ISO 1183	1.23
Shrinkage rate	MD	ISO 294-4	0.70 %
			ASTM D955	0.7-1.2 %
		TD	ISO 294-4	1.2 %
Top out temperature			210 °C
Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	2.2 %
		23°C,24hr	ISO 62	1.7 %
		Saturation,23°C,2.00mm	ISO 62	7.6 %
			ASTM D570/ISO 62	2.2 %

impact performance	Test Condition	Test Method	DUPONT USA/70G13L NC010
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	40 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	40 kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	40 kJ/m²
Suspended wall beam without notch impact strength		-30°C	ISO 180/1U	35 kJ/m²

flammability	Test Condition	Test Method	DUPONT USA/70G13L NC010
Burning rate	1.00mm	ISO 3795	27 mm/min
Extreme Oxygen Index		ISO 4589-2	24 %
FMVSS flammability		FMVSS302	B
UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	HB
		0.71mm	IEC 60695-11-10,-20	HB
		1.5mm	UL 94	HB
		0.71mm	UL 94	HB

Get App

Top