Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC AD143-111 SABIC INNOVATIVE NETHERLANDS
LEXAN™
household electrical appl、Casters、Electrical applications
Thermal stability、High gloss
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE NETHERLANDS/AD143-111 |
|---|---|---|---|
| Unscented Izod Impact Strength 8 | -30°C | ISO180/1U | 无断裂 |
| 23°C | ISO180/1U | 无断裂 | |
| Impact strength of simply supported beam gap 7 | -30°C | ISO179/1eA | 14 kJ/m² |
| 23°C | ISO179/1eA | 73 kJ/m² | |
| The impact strength of a simply supported beam without a notch is 7 | -30°C | ISO179/1eU | 无断裂 |
| 23°C | ISO179/1eU | 无断裂 | |
| Dart impact equipped with measuring instruments | 23°C,TotalEnergy | ASTMD3763 | 64.0 J |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE NETHERLANDS/AD143-111 |
|---|---|---|---|
| H358/30 | ISO2039-1 | 95.0 Mpa |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NETHERLANDS/AD143-111 |
|---|---|---|---|
| tensile strength | 断裂 | ISO527-2/50 | 70.0 Mpa |
| Tensile modulus | --2 | ASTMD638 | 2300 Mpa |
| Bending stress | --5,6 | ISO178 | 90.0 Mpa |
| elongation | 屈服 | ISO527-2/50 | 6.0 % |
| Bending stress | 屈服,50.0mm跨距4 | ASTMD790 | 97.0 Mpa |
| Flexural modulus | 50.0mm跨距4 | ASTMD790 | 2340 Mpa |
| tensile strength | 屈服 | ISO527-2/50 | 63.0 Mpa |
| Tensile modulus | -- | ISO527-2/1 | 2350 Mpa |
| 1000Cycles,1000g,CS-17转轮 | 内部方法 | 10.0 mg | |
| elongation | 断裂3 | ASTMD638 | 130 % |
| tensile strength | 屈服3 | ASTMD638 | 62.0 Mpa |
| 断裂3 | ASTMD638 | 69.0 Mpa | |
| elongation | 断裂 | ISO527-2/50 | 120 % |
| 屈服3 | ASTMD638 | 7.0 % | |
| Flexural modulus | --5 | ISO178 | 2300 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE NETHERLANDS/AD143-111 |
|---|---|---|---|
| Surface Resistivity | ASTMD257 | 5E+13 ohms |
| optical performance | Test Condition | Test Method | SABIC INNOVATIVE NETHERLANDS/AD143-111 |
|---|---|---|---|
| transmissivity | 2540µm | ASTMD1003 | 89.0 % |
| refractive index | ISO489 | 1.586 | |
| Haze ratio | 2540µm | ASTMD1003 | <0.80 % |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE NETHERLANDS/AD143-111 |
|---|---|---|---|
| Burning wire flammability index | 1.6mm | IEC60695-2-12 | 850 °C |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE NETHERLANDS/AD143-111 |
|---|---|---|---|
| Water absorption rate | 平衡,23°C,50%RH | ISO62 | 0.15 % |
| 饱和,23°C | ISO62 | 0.35 % | |
| Shrinkage rate | MD:3.20mm | 内部方法 | 0.50到0.70 % |
| melt mass-flow rate | 300°C/1.2kg | ASTMD1238 | 13 g/10min |
| Melt volume flow rate | 300°C/1.2kg | ISO1133 | 12.0 cm3/10min |
| Shrinkage rate | TD:3.20mm | 内部方法 | 0.50到0.70 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NETHERLANDS/AD143-111 |
|---|---|---|---|
| 1.8MPa,未退火,3.20mm | ASTMD648 | 114 °C | |
| BallPressure Test | 125°C | IEC60695-10-2 | 通过 |
| TD:23到80°C | ISO11359-2 | 7E-05 cm/cm/°C | |
| 1.8MPa,未退火,6.40mm | ASTMD648 | 130 °C | |
| vicat | -- | ASTMD152510 | 153 °C |
| MD:23到80°C | ISO11359-2 | 7E-05 cm/cm/°C | |
| vicat | -- | ISO306/B50 | 140 °C |
| MD:-40到40°C | ASTME831 | 7E-05 cm/cm/°C | |
| 1.8MPa,未退火,100mm跨距9 | ISO75-2/Ae | 123 °C | |
| TD:-40到40°C | ASTME831 | 7E-05 cm/cm/°C | |
| vicat | -- | ISO306/B120 | 141 °C |
| thermal conductivity | ISO8302 | 0.20 W/m/K | |
| 0.45MPa,未退火,100mm跨距9 | ISO75-2/Be | 135 °C |
Contact Us
Get App
Top