Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

COC APL6011T MITSUI CHEM JAPAN
APEL™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | MITSUI CHEM JAPAN/APL6011T |
|---|---|---|---|
| density | ASTM D792 | 1.03 | |
| melt mass-flow rate | ASTM D1238 | 26 g/10min |
| thermal performance | Test Condition | Test Method | MITSUI CHEM JAPAN/APL6011T |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 95 °C |
| mechanical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/APL6011T |
|---|---|---|---|
| Bending modulus | ASTM D790 | 2700 Mpa | |
| bending strength | ASTM D790 | 110 Mpa | |
| elongation | Break | ASTM D638 | 3.0 % |
| Impact strength of cantilever beam gap | ASTM D256 | 25 J/m | |
| tensile strength | ASTM D638 | 60 Mpa |
| Physical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/APL6011T |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.006 |
| optical performance | Test Condition | Test Method | MITSUI CHEM JAPAN/APL6011T |
|---|---|---|---|
| Refractive index | ASTM D542 | 1.540 | |
| Transmittance rate | ASTM D1003 | 90.0 % | |
| turbidity | ASTM D1003 | 3.0 % |