Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 A218V40 BK SOLVAY FRANCE
TECHNYL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | SOLVAY FRANCE/A218V40 BK |
---|---|---|---|
Hot deformation temperature | 1.8 MPa, Unannealed | ISO 75-2/Af | 255 °C |
Melting temperature | ISO 11357-3 | 262 °C |
mechanical properties | Test Condition | Test Method | SOLVAY FRANCE/A218V40 BK |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 11000 Mpa |
Tensile modulus | 23°C | ISO 527-2/1A | 13000 Mpa |
Tensile strain | Break, 23°C | ISO 527-2 | 2.5 % |
tensile strength | Break, 23°C | ISO 527-2/1A | 215 Mpa |
Electrical performance | Test Condition | Test Method | SOLVAY FRANCE/A218V40 BK |
---|---|---|---|
Compared to the anti leakage trace index | Solution A | IEC 60112 | PLC 1 |
Dielectric strength | 2.00 mm | IEC 60243-1 | 35 KV/mm |
Dissipation factor | IEC 60250 | 0.010 | |
Relative permittivity | IEC 60250 | 3.70 | |
Surface resistivity | IEC 60093 | 6.0E+15 ohms | |
Volume resistivity | IEC 60093 | 1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | SOLVAY FRANCE/A218V40 BK |
---|---|---|---|
Shrinkage rate | 横向Flow | ISO 294-4 | 0.90 % |
Flow | ISO 294-4 | 0.35 % | |
Water absorption rate | 24 hr, 23°C | ISO 62 | 0.70 % |
Equilibrium, 23°C, 50% RH | ISO 62 | 1.9 % |
impact performance | Test Condition | Test Method | SOLVAY FRANCE/A218V40 BK |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 85 kJ/m² |
flammability | Test Condition | Test Method | SOLVAY FRANCE/A218V40 BK |
---|---|---|---|
Extreme Oxygen Index | ISO 4589-2 | 23 % | |
UL flame retardant rating | 1.6 mm | UL 94 | HB |
injection | Test Condition | Test Method | SOLVAY FRANCE/A218V40 BK |
---|---|---|---|
drying temperature | 80 °C | ||
Mold temperature | 70 to 100 °C | ||
Suggested maximum moisture content | 0.20 % | ||
Temperature at the front of the material cylinder | 280 to 300 °C | ||
Temperature at the rear of the barrel | 270 to 280 °C | ||
Temperature in the middle of the barrel | 280 to 290 °C |