Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT+ASA RAMLLOY PFS301G6 POLYRAM ISRAEL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 85 J/m |
| 23°C | ISO 180 | 10 kJ/m² |
| Electrical performance | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| dielectric constant | 1MHz | IEC 60250 | 3.70 |
| Mechanical properties | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| Tensile strain | 断裂 | ISO 527-2 | 3.0 % |
| Flexural modulus | ASTM D790 | 7000 MPa | |
| Tensile modulus | ASTM D638 | 9800 MPa | |
| ISO 527-2 | 9800 MPa | ||
| tensile strength | 屈服 | ASTM D638 | 130 MPa |
| 屈服 | ISO 527-2 | 130 MPa | |
| Flexural modulus | ISO 178 | 7000 MPa | |
| bending strength | ASTM D790 | 190 MPa | |
| ISO 178 | 190 MPa |
| flammability | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |
| physical property | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| Shrinkage rate | ISO 2577 | 0.16 % | |
| MD | ASTM D955 | 0.16 % | |
| density | ASTM D792 | 1.48 g/cm³ | |
| ISO 1183 | 1.48 g/cm³ | ||
| melt mass-flow rate | 275°C/2.16kg | ASTM D1238 | 15 g/10min |
| 275°C/2.16kg | ISO 1133 | 15 g/10min |
| Thermal performance | Test Condition | Test Method | POLYRAM ISRAEL/RAMLLOY PFS301G6 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 170 °C |
| melting temperature | ISO 11357-3 | 220 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 206 °C |
| 0.45MPa,未退火，HDT | ISO 75-2/B | 205 °C | |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 170 °C | |
| melting temperature | ASTM D3418 | 220 °C |
Contact Us
Get App
Top