Material Comparison
Add Comparison Model
Select Products for Comparison (1/4)
Highlight Differences
Hide Same
Product Name / Manufacturer / Model
Grade
Reference Price
| mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/LN-3010RM |
|---|---|---|---|
| bending strength | ISO 178 | 92.0 Mpa | |
| Tensile modulus | ISO 527-2/1 | 2650 Mpa | |
| tensile strength | Break | ISO 527-2/50 | 54.0 Mpa |
| Yield | ISO 527-2/50 | 60.0 Mpa | |
| Tensile strain | Break | ISO 527-2/50 | 100 % |
| Bending modulus | ISO 178 | 2430 Mpa | |
| Tensile strain | Yield | ISO 527-2/50 | 6.0 % |
| Physical properties | Test Condition | Test Method | TEIJIN JAPAN/LN-3010RM |
| Shrinkage rate | MD:4.00mm | Internal Method | 0.40-0.60 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
| Shrinkage rate | TD:4.00mm | Internal Method | 0.40-0.60 % |
| thermal performance | Test Condition | Test Method | TEIJIN JAPAN/LN-3010RM |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 7E-05 cm/cm/°C |
| RTI Str | 1.5mm | UL 746 | 80.0 °C |
| RTI Imp | 1.5mm | UL 746 | 80.0 °C |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 134 °C |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 7E-05 cm/cm/°C |
| RTI Elec | 1.5mm | UL 746 | 80.0 °C |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 125 °C |
| Vicat softening temperature | ISO 306/B50 | 138 °C | |
| Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/LN-3010RM |
| Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| Relative permittivity | 100Hz | IEC 60250 | 3.40 |
| Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
| Relative permittivity | 1MHz | IEC 60250 | 3.40 |
| Dielectric strength | IEC 60243-1 | 32 KV/mm | |
| impact performance | Test Condition | Test Method | TEIJIN JAPAN/LN-3010RM |
| Impact strength of simply supported beam without notch | ISO 179 | NoBreak | |
| flammability | Test Condition | Test Method | TEIJIN JAPAN/LN-3010RM |
| UL flame retardant rating | 0.40mm | UL 94 | V-2 |
| 1.6mm | UL 94 | V-0 |
