Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ASA/PC HRA170-BR6A1436 SABIC INNOVATIVE US
GELOY™
Automotive sector
Weather resistance,heat-resisting,High impact resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | SABIC INNOVATIVE US/HRA170-BR6A1436 |
|---|---|---|---|
| Ball Pressure Test | H 358/30 | ISO 2039-1 | 106 Mpa |
| Rockwell hardness | R 计秤 | ISO 2039-2 | 120 |
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/HRA170-BR6A1436 |
|---|---|---|---|
| Hot deformation temperature | 1.8 MPa, 未退火, 4.00 mm, 100 mm 跨距 | ISO 75-2/Ae | 112 °C |
| 0.45 MPa, 未退火, 4.00 mm, 100 mm 跨距 | ISO 75-2/Be | 121 °C | |
| Linear coefficient of thermal expansion | 23 到 60°C，流动 | ISO 11359-2 | 8.0E-5 cm/cm/°C |
| thermal conductivity | ISO 8302 | 0.20 W/m/K | |
| Vicat softening temperature | -- | ISO 306/B120 | 132 °C |
| -- | ISO 306/B50 | 129 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/HRA170-BR6A1436 |
|---|---|---|---|
| Bending modulus | ISO 178 | 2400 Mpa | |
| bending strength | ISO 178 | 85.0 Mpa | |
| Taber abraser | 1000 Cycles, 1000 g, CS-17 转轮 | Internal Method | 95.0 mg |
| Tensile modulus | ISO 527-2/1 | 2500 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 130 % |
| 屈服 | ISO 527-2/5 | 5.0 % | |
| 断裂 | ISO 527-2/50 | > 50 % | |
| 屈服 | ISO 527-2/50 | 4.0 % | |
| tensile strength | 屈服 | ISO 527-2/50 | 62.0 Mpa |
| 断裂 | ISO 527-2/5 | 60.0 Mpa | |
| 断裂 | ISO 527-2/50 | 62.0 Mpa | |
| 屈服 | ISO 527-2/5 | 55.0 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/HRA170-BR6A1436 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | V | |
| Dielectric strength | 3.20 mm, 在油中 | IEC 60243-1 | 17 KV/mm |
| Dissipation factor | 1 MHz | IEC 60250 | 0.013 |
| Relative permittivity | 1 MHz | IEC 60250 | 2.80 |
| Surface resistivity | IEC 60093 | > 1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/HRA170-BR6A1436 |
|---|---|---|---|
| Melt Volume Flow Rate (MVR) | 260°C/5.0 kg | ISO 1133 | 17.0 cm3/10min |
| Shrinkage rate | Flow | Internal Method | 0.40 - 0.60 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.60 % |
| 平衡, 23°C, 50% RH | ISO 62 | 0.20 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/HRA170-BR6A1436 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 60 kJ/m² |
| -30°C | ISO 179/1eA | 12 kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 15 kJ/m² |
| 23°C | ISO 180/1A | 45 kJ/m² |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/HRA170-BR6A1436 |
|---|---|---|---|
| Burning wire flammability index | 3.2 mm | IEC 60695-2-12 | 750 °C |
| Extreme Oxygen Index | ISO 4589-2 | 22 % | |
| UL flame retardant rating | 1.6 mm | UL 94 | HB |
| injection | Test Condition | Test Method | SABIC INNOVATIVE US/HRA170-BR6A1436 |
|---|---|---|---|
| drying temperature | 100 to 110 °C | ||
| drying time | 2.0 to 4.0 hr | ||
| Hopper temperature | 60 to 80 °C | ||
| Mold temperature | 60 to 90 °C | ||
| Processing (melt) temperature | 260 to 290 °C | ||
| Spray nozzle temperature | 240 to 280 °C | ||
| Suggested maximum moisture content | 0.020 % | ||
| Temperature at the front of the material cylinder | 250 to 290 °C | ||
| Temperature at the rear of the barrel | 230 to 260 °C | ||
| Temperature in the middle of the barrel | 250 to 290 °C |