Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PES SUMIPLOY® AS1411 SumiDurez Singapore Pte Ltd
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SumiDurez Singapore Pte Ltd/SUMIPLOY® AS1411 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 6.40mm | ASTM D256 | 30 J/m |
| Suspended wall beam without notch impact strength | 6.40mm | ASTM D256 | 220 J/m |
| hardness | Test Condition | Test Method | SumiDurez Singapore Pte Ltd/SUMIPLOY® AS1411 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 125 |
| Mechanical properties | Test Condition | Test Method | SumiDurez Singapore Pte Ltd/SUMIPLOY® AS1411 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.7 % |
| tensile strength | ASTM D638 | 74.0 MPa | |
| Flexural modulus | ASTM D790 | 5400 MPa | |
| bending strength | ASTM D790 | 105 MPa |
| flammability | Test Condition | Test Method | SumiDurez Singapore Pte Ltd/SUMIPLOY® AS1411 |
|---|---|---|---|
| UL flame retardant rating | 0.53mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | SumiDurez Singapore Pte Ltd/SUMIPLOY® AS1411 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.26 % |
| Water absorption rate | 24hr | ASTM D570 | 0.50 % |
| density | ASTM D792 | 1.52 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 0.36 % |
| Thermal performance | Test Condition | Test Method | SumiDurez Singapore Pte Ltd/SUMIPLOY® AS1411 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 209 °C |
| Linear coefficient of thermal expansion | TD:50到150°C | ASTM D696 | 4.6E-05 cm/cm/°C |
| MD:-50到150°C | ASTM D696 | 2.9E-05 cm/cm/°C |
Contact Us
Get App
Top