Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPU A 80 P 5039 HUNTSMAN GERMANY
IROGRAN®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | HUNTSMAN GERMANY/A 80 P 5039 |
|---|---|---|---|
| 邵氏A,注塑 | ASTMD2240,DIN53505 | 81 |
| Mechanical properties | Test Condition | Test Method | HUNTSMAN GERMANY/A 80 P 5039 |
|---|---|---|---|
| Abrasion2 | -- | 54 mm³ | |
| -- | DIN53515 | 50 mm³ |
| physical property | Test Condition | Test Method | HUNTSMAN GERMANY/A 80 P 5039 |
|---|---|---|---|
| Melt volume flow rate | 190°C/21.6kg | 140 cm3/10min | |
| Shrinkage rate | MD：注塑 | ASTMD955 | 11 % |
| elastomer | Test Condition | Test Method | HUNTSMAN GERMANY/A 80 P 5039 |
|---|---|---|---|
| Tear strength 3 | 0.635mm | ASTMD624 | 89.3 kN/m |
| Compression permanent deformation 2 | 23°C,22hr | ASTMD395,DIN53517 | 24 % |
| tensile strength | 断裂,0.635mm | DIN53504 | 30.0 Mpa |
| Tensile stress 3 | 300%应变,0.635mm | DIN53504 | 8.40 Mpa |
| elongation | 断裂,0.635mm | DIN53504 | 750 % |
| Compression permanent deformation 2 | 70°C,22hr | ASTMD395,DIN53517 | 46 % |
| elongation | 断裂,0.635mm | ASTMD412 | 810 % |
| Tensile stress 3 | 100%应变,0.635mm | ASTMD412 | 5.93 Mpa |
| tensile strength | 断裂,0.635mm | ASTMD412 | 21.0 Mpa |
| Tear strength 3 | 0.635mm | DIN53515 | 45 kN/m |
| Tensile stress 3 | 300%应变,0.635mm | ASTMD412 | 8.27 Mpa |
| 100%应变,0.635mm | DIN53504 | 5.70 Mpa |
| Thermal performance | Test Condition | Test Method | HUNTSMAN GERMANY/A 80 P 5039 |
|---|---|---|---|
| Melting temperature 4 | TMA | 126到150 °C |
Contact Us
Get App
Top