Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Phenolic Resinoid 7051SS Resinoid Engineering Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 7051SS |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256 | 48 J/m |
hardness | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 7051SS |
---|---|---|---|
Rockwell hardness | E计秤 | ASTM D785 | 100 |
M级 | ASTM D785 | 120 |
Mechanical properties | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 7051SS |
---|---|---|---|
bending strength | 屈服 | ASTM D790 | 165 MPa |
compressive strength | ASTM D695 | 276 MPa | |
Flexural modulus | ASTM D790 | 16500 MPa | |
tensile strength | 屈服 | ASTM D638 | 64.8 MPa |
Electrical performance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 7051SS |
---|---|---|---|
Volume resistivity | ASTM D257 | 1.2E+11 ohms·cm | |
dielectric strength | ASTM D149 | 11 kV/mm | |
arc resistance | 1.59mm | ASTM D495 | 180 sec |
flammability | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 7051SS |
---|---|---|---|
UL flame retardant rating | 1.6mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 7051SS |
---|---|---|---|
Shrinkage rate | MD | ASTM D955 | 0.10to0.20 % |
Water absorption rate | 24hr | ASTM D570 | 0.15 % |
Shrinkage rate | ASTM D1895 | 2.0 | |
density | ASTM D792 | 1.74 g/cm³ |
Thermal performance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 7051SS |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 288 °C |
Linear coefficient of thermal expansion | MD | ASTM D696 | 3.8E-05 cm/cm/°C |
Contact Us
Get App
Top