Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 66 GREY 2812 Dilaplast S.p.A.
--
wheel
Filler, glass mineral, 16%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Dilaplast S.p.A./66 GREY 2812 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 7.5 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Dilaplast S.p.A./66 GREY 2812 |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 4.5 % |
| tensile strength | 屈服 | ISO 527-2 | 70.0 MPa |
| Flexural modulus | ISO 178 | 4.00 MPa |
| Electrical performance | Test Condition | Test Method | Dilaplast S.p.A./66 GREY 2812 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 1 | |
| dielectric strength | ASTM D149 | 21 kV/mm |
| flammability | Test Condition | Test Method | Dilaplast S.p.A./66 GREY 2812 |
|---|---|---|---|
| Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 750 °C |
| physical property | Test Condition | Test Method | Dilaplast S.p.A./66 GREY 2812 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.55to0.75 % |
| density | ISO 1183 | 1.24 g/cm³ |
| Thermal performance | Test Condition | Test Method | Dilaplast S.p.A./66 GREY 2812 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 150 °C |
Contact Us
Get App
Top