Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA46 HFX31SW WT94001 DSM HOLAND
Stanyl®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DSM HOLAND/HFX31SW WT94001 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 49 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DSM HOLAND/HFX31SW WT94001 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 7500 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 2.9 % |
| Flexural modulus | ISO 178 | 7500 Mpa | |
| tensile strength | 断裂 | ISO 527-2 | 120 Mpa |
| Electrical performance | Test Condition | Test Method | DSM HOLAND/HFX31SW WT94001 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 1 | |
| dielectric strength | IEC 60243-1 | 33 KV/mm | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm | |
| relative permittivity | 1.00 GHz | IEC 60250 | 3.60 |
| 10.0 GHz | IEC 60250 | 3.60 |
| flammability | Test Condition | Test Method | DSM HOLAND/HFX31SW WT94001 |
|---|---|---|---|
| Flammability level | UL 94 | V-0 |
| physical property | Test Condition | Test Method | DSM HOLAND/HFX31SW WT94001 |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 2.8 % |
| Shrinkage rate | 流量 | ISO 294-4 | 0.80 % |
| 横向流量 | ISO 294-4 | 1.3 % |
| Thermal performance | Test Condition | Test Method | DSM HOLAND/HFX31SW WT94001 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 295 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 285 °C |
| RTI Elec | 0.200 mm | UL 746 | 120 °C |
| Linear coefficient of thermal expansion | 流动 | ISO 11359-2 | 2.5E-5 cm/cm/°C |
| 横向 | ISO 11359-2 | 6.5E-5 cm/cm/°C |
Contact Us
Get App
Top