Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TEEE RTP 1500.5-55D RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 1500.5-55D |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 570 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 420 J/m |
| Supplementary Information | Test Condition | Test Method | RTP US/RTP 1500.5-55D |
|---|---|---|---|
| Primary Additive | 5.0 % |
| hardness | Test Condition | Test Method | RTP US/RTP 1500.5-55D |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 55 |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 1500.5-55D |
|---|---|---|---|
| tensile strength | ASTM D638 | 28.6 MPa | |
| elongation | 屈服 | ASTM D638 | 500 % |
| Tensile modulus | ASTM D638 | 552 MPa | |
| Flexural modulus | ASTM D790 | 414 MPa | |
| bending strength | ASTM D790 | 17.7 MPa |
| physical property | Test Condition | Test Method | RTP US/RTP 1500.5-55D |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.50to0.90 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.40 % |
| water content | <0.10 % | ||
| density | ASTM D792 | 1.22 g/cm³ |
Contact Us
Get App
Top