Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PAS RTP 1605 TFE 15 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 91 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 350 J/m |
| hardness | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 120 |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.0 % |
| tensile strength | ASTM D638 | 110 MPa | |
| Tensile modulus | ASTM D638 | 11700 MPa | |
| Flexural modulus | ASTM D790 | 9650 MPa | |
| bending strength | ASTM D790 | 145 MPa |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| flammability | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.20 % |
| density | ASTM D792 | 1.70 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.20 % |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 204 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 207 °C |
Contact Us
Get App
Top