Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC G-3420R TEIJIN JAPAN
PANLITE®
Casters,Electrical applications
High rigidity,enhance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | TEIJIN JAPAN/G-3420R |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 150 °C |
1.8MPa,Unannealed | ISO 75-2/A | 147 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 6E-05 cm/cm/°C |
MD | ISO 11359-2 | 3E-05 cm/cm/°C | |
RTI Elec | 1.5mm | UL 746 | 130 °C |
RTI Imp | 1.5mm | UL 746 | 125 °C |
RTI Str | 1.5mm | UL 746 | 130 °C |
Vicat softening temperature | ISO 306/B50 | 152 °C |
mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/G-3420R |
---|---|---|---|
Bending modulus | ISO 178 | 5400 Mpa | |
ASTM D790/ISO 178 | 5400(55000) kg/cm²(MPa)[Lb/in²] | ||
bending strength | ASTM D790/ISO 178 | 157(1600) kg/cm²(MPa)[Lb/in²] | |
ISO 178 | 140 Mpa | ||
Charpy Notched Impact Strength | ASTM D256/ISO 179 | 137(14) kg·cm/cm(J/M)ft·lb/in | |
Elongation at Break | ASTM D638/ISO 527 | 4.5 % | |
Tensile modulus | ISO 527-2/1 | 6100 Mpa | |
ASTM D638/ISO 527 | 5890(60000) kg/cm²(MPa)[Lb/in²] | ||
Tensile strain | Break | ISO 527-2/5 | 2.5 % |
tensile strength | Break | ISO 527-2/5 | 90.0 Mpa |
ASTM D638/ISO 527 | 105(1070) kg/cm²(MPa)[Lb/in²] |
Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/G-3420R |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
Dielectric strength | IEC 60243-1 | 35 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 9E-03 |
100Hz | IEC 60250 | 1E-03 | |
Relative permittivity | 100Hz | IEC 60250 | 3.40 |
1MHz | IEC 60250 | 3.40 | |
Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
other | Test Condition | Test Method | TEIJIN JAPAN/G-3420R |
---|---|---|---|
characteristic | 标准规格型 |
Physical properties | Test Condition | Test Method | TEIJIN JAPAN/G-3420R |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.34 | |
Shrinkage rate | MD:4.00mm | Internal Method | 0.10-0.30 % |
TD:4.00mm | Internal Method | 0.40-0.60 % | |
Water absorption rate | 23°C,24hr | ISO 62 | 0.14 % |
ASTM D570/ISO 62 | 0.14 % |
impact performance | Test Condition | Test Method | TEIJIN JAPAN/G-3420R |
---|---|---|---|
Impact strength of simply supported beam without notch | ISO 179 | 40 kJ/m² |
flammability | Test Condition | Test Method | TEIJIN JAPAN/G-3420R |
---|---|---|---|
UL flame retardant rating | 0.43mm | UL 94 | HB |
3.0mm | UL 94 | V-1 | |
0.8mm | UL 94 | V-2 |