Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT Ranger PBT PBT-201-G0 Beijing Ranger Chemical Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | Beijing Ranger Chemical Co., Ltd./Ranger PBT PBT-201-G0 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 70.0 °C |
| 0.45MPa,Unannealed | ASTM D648 | 180 °C |
| mechanical properties | Test Condition | Test Method | Beijing Ranger Chemical Co., Ltd./Ranger PBT PBT-201-G0 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 5000 MPa | |
| bending strength | ASTM D790 | 80.0 MPa | |
| tensile strength | Yield | ASTM D638 | 60.0 MPa |
| Electrical performance | Test Condition | Test Method | Beijing Ranger Chemical Co., Ltd./Ranger PBT PBT-201-G0 |
|---|---|---|---|
| Dielectric constant | 50Hz | ASTM D150 | 3.00 |
| Dielectric strength | 2.00mm | ASTM D149 | 19 kV/mm |
| Dissipation factor | 50Hz | ASTM D150 | 0.020 |
| Volume resistivity | 2.00mm | ASTM D257 | 1.1E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | Beijing Ranger Chemical Co., Ltd./Ranger PBT PBT-201-G0 |
|---|---|---|---|
| density | ASTM D792 | 1.40 g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | 1.4to2.0 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.10 % |
| impact performance | Test Condition | Test Method | Beijing Ranger Chemical Co., Ltd./Ranger PBT PBT-201-G0 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 5.4 kJ/m² | |
| Suspended wall beam without notch impact strength | ASTM D256 | 50 kJ/m² |
| flammability | Test Condition | Test Method | Beijing Ranger Chemical Co., Ltd./Ranger PBT PBT-201-G0 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | V-0 |
| 1.6mm | UL 94 | V-0 |