Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POE 8210 EXXONMOBIL USA
EXACT™
film
Toughening、High impact resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | EXXONMOBIL USA/8210 |
|---|---|---|---|
| tensile strength | @300% Elongation | ASTM D-412 | 493（3.4） Psi(MPa) |
| Mooney viscosity ML (1+4) | 125℃ | ASTM D-1646 | 5.9 Torgue Units |
| elongation at break | @Break | ASTM D-412 | No Break % |
| tensile strength | @100% Elongation | ASTM D-412 | 407（2.8） Psi(MPa) |
| ASTM D-624 | 245.9（43.1） lb/in(kN/m) |
| Basic performance | Test Condition | Test Method | EXXONMOBIL USA/8210 |
|---|---|---|---|
| Shore hardness | Shore D,15 sec | ASTM D-2240 | 27 |
| Shore A,15 sec | ASTM D-2240 | 79 | |
| melt mass-flow rate | ASTM D-1238 | 25 g/10 min | |
| density | ExxonMobil Method | 0.882 g/cm | |
| Haze ratio | ASTM D-1003 | 13@50mils % |
| physical property | Test Condition | Test Method | EXXONMOBIL USA/8210 |
|---|---|---|---|
| elongation at break | @Break | ASTM D-638 | No Break % |
| Flexural modulus | 1% secant | ASTM D-790 | 3807(26.2) Psi(MPa) |
| tensile strength | @Break | ASTM D-638 | No Break Psi(MPa) |
| Impact strength of cantilever beam gap | -40℃ | ASTM D-256 | No Break Ft-lb/in(J/m) |
| 23℃ | ASTM D-256 | No Break Ft-lb/in(J/m) |
| Thermal performance | Test Condition | Test Method | EXXONMOBIL USA/8210 |
|---|---|---|---|
| vicat | 200g | ASTM D-1525 | 159.8（71.0） ℉(℃) |
| Maximum melt temperature | ExxonMobil Method | 164.7(73.7) ℉(℃) |
Contact Us
Get App
Top