Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS M220 ELIX POLYMERS SPANISH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodELIX POLYMERS SPANISH/M220
Impact strength of simply supported beam without notch23°CISO 179/1eU100 kJ/m²
-30°CISO 179/1eU80 kJ/m²
hardnessTest ConditionTest MethodELIX POLYMERS SPANISH/M220
ISO 2039-1103 Mpa
Mechanical propertiesTest ConditionTest MethodELIX POLYMERS SPANISH/M220
Flexural modulus-- 5ASTM D7902200 Mpa
tensile strength屈服ISO 527-2/5041.0 Mpa
Bending stress 6ISO 17865.0 Mpa
Flexural modulus-- 6ISO 1782200 Mpa
Tensile modulus--ISO 527-2/12300 Mpa
tensile strength屈服 4ASTM D63837.9 Mpa
Tensile modulus-- 4ASTM D6382300 Mpa
Electrical performanceTest ConditionTest MethodELIX POLYMERS SPANISH/M220
Dissipation Factor1 MHzIEC 602509.0E-3
1 MHzIEC 602502.90
Volume resistivityIEC 600931.0E+18 ohms·cm
Dissipation Factor100 HzIEC 602507.3E-3
Surface ResistivityIEC 600931.0E+16 ohms
dielectric strength1.00 mmIEC 60243-135 KV/mm
100 HzIEC 602502.90
physical property Test ConditionTest MethodELIX POLYMERS SPANISH/M220
melt mass-flow rate230°C/3.8 kgASTM D123811 g/10 min
Molten Volume Flow Rate (MVR)220°C/10.0 kgISO 113332.0 cm3/10min
Shrinkage rate流量ISO 294-40.60 %
横向流量ISO 294-40.60 %
Thermal performanceTest ConditionTest MethodELIX POLYMERS SPANISH/M220
vicat--ISO 306/B12097.0 °C
1.8 MPa, 退火ISO 75-2/A92.0 °C
0.45 MPa, 退火ISO 75-2/B97.0 °C
vicat--ASTM D15257, ISO 306/B50795.0 °C
横向 : 23 到 55°CISO 11359-21.0E-4 cm/cm/°C
流动 : 23 到 55°CISO 11359-21.0E-4 cm/cm/°C
injectionTest ConditionTest MethodELIX POLYMERS SPANISH/M220
Temperature80 °C
Processing (melt) temperature240 °C
Injection VelocityISO 29414 m/min

Contact Us

Get App

Top