Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Epoxy Thermoset Plastics 302 Thermoset, Lord Chemical Products
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics 302 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 20 J/m |
| hardness | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics 302 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 90 |
| Mechanical properties | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics 302 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 3.0 % |
| tensile strength | 屈服 | ASTM D638 | 44.8 MPa |
| Electrical performance | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics 302 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 3E+15 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.024 |
| dielectric constant | 1MHz | ASTM D150 | 4.20 |
| thermosetting | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics 302 |
|---|---|---|---|
| stripping time | 25°C | 1400 min | |
| Thermosetting components | 按重量计算的混合比 | 100 | |
| 硬化法 | 按重量计算的混合比:7.0 | ||
| Thermosetting mixed viscosity | 25°C | ASTM D2393 | 3500 cP |
| physical property | Test Condition | Test Method | Thermoset, Lord Chemical Products/Thermoset Plastics 302 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.16 % |
| density | ASTM D792 | 1.52 g/cm³ |
Contact Us
Get App
Top