Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA46 TW242FM10 BK DSM HOLAND
Stanyl®
Automotive Applications、Electrical applications
Thermal stability、wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DSM HOLAND/TW242FM10 BK |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 6.0 kJ/m² |
| -30°C | ISO 179/1eA | 4.5 kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6.0 kJ/m² |
| -40°C | ISO 180/1A | 4.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DSM HOLAND/TW242FM10 BK |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 14500 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 2.0 % |
| Flexural modulus | ISO 178 | 11000 Mpa | |
| tensile strength | 断裂 | ISO 527-2 | 160 Mpa |
| physical property | Test Condition | Test Method | DSM HOLAND/TW242FM10 BK |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.8 % |
| density | ISO 1183 | 1.63 g/cm³ | |
| Shrinkage rate | 流量 | ISO 294-4 | 0.20 % |
| 横向流量 | ISO 294-4 | 1.3 % |
| Thermal performance | Test Condition | Test Method | DSM HOLAND/TW242FM10 BK |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 295 °C | |
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 290 °C |
| 1.8 MPa, 未退火，HDT | ISO 75-2/A | 285 °C | |
| Linear coefficient of thermal expansion | 流动 | ISO 11359-2 | 2.5E-5 cm/cm/°C |
| 横向 | ISO 11359-2 | 5.0E-5 cm/cm/°C |
Contact Us
Get App
Top