Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS R-4-230BL CPCHEM NETHERLANDS
--
Application in the automo
Filler: Glass fiber reinf、40% filler by weight、40% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | CPCHEM NETHERLANDS/R-4-230BL |
|---|---|---|---|
| ISO180 | 20 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO180/A | 8.0 kJ/m² | |
| Suspended wall beam without notch impact strength | 3.18mm | ASTMD4812 | 400 J/m |
| Impact strength of cantilever beam gap | 3.17mm | ASTMD256 | 80 J/m |
| hardness | Test Condition | Test Method | CPCHEM NETHERLANDS/R-4-230BL |
|---|---|---|---|
| Rockwell hardness | M计秤 | ASTMD785 | 104 |
| R计秤 | ASTMD785 | 122 |
| Mechanical properties | Test Condition | Test Method | CPCHEM NETHERLANDS/R-4-230BL |
|---|---|---|---|
| elongation | 断裂 | ASTMD638 | 1.2 % |
| tensile strength | ASTMD638 | 165 Mpa | |
| Tensile stress | ISO527-2 | 145 Mpa | |
| compressive strength | ASTMD695 | 275 Mpa | |
| Flexural modulus | ASTMD790 | 14500 Mpa | |
| Bending stress | ISO178 | 210 Mpa | |
| Flexural modulus | ISO178 | 14000 Mpa | |
| bending strength | ASTMD790 | 221 Mpa | |
| Poisson's ratio | 0.43 | ||
| Tensile strain | 断裂 | ISO527-2 | 1.1 % |
| Electrical performance | Test Condition | Test Method | CPCHEM NETHERLANDS/R-4-230BL |
|---|---|---|---|
| Volume resistivity | ASTMD257 | 1E+16 ohms·cm | |
| InsulationResistance2 | 90°C | 1E+12 ohms | |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL746 | 150 V |
| dielectric constant | 25°C,1kHz | ASTMD150 | 3.90 |
| arc resistance | ASTMD495 | 125 sec | |
| dielectric constant | 25°C,1MHz | ASTMD150 | 3.90 |
| Dissipation Factor | 25°C,1kHz | ASTMD150 | 2E-03 |
| dielectric strength | ASTMD149 | 20 KV/mm | |
| Dissipation Factor | 25°C,1MHz | ASTMD150 | 2E-03 |
| Surface Resistivity | ASTMD257 | 1E+16 ohms |
| flammability | Test Condition | Test Method | CPCHEM NETHERLANDS/R-4-230BL |
|---|---|---|---|
| Limiting Oxygen Index | ASTMD2863 | 50 % | |
| FlameRating | 1.6mm | UL94 | V-05VA |
| physical property | Test Condition | Test Method | CPCHEM NETHERLANDS/R-4-230BL |
|---|---|---|---|
| Shrinkage rate | TD：3.20mm | 0.50 % | |
| density | ASTMD792 | 1.68 g/cm³ | |
| Water absorption rate | 23°C,24hr | ASTMD570 | 0.020 % |
| Shrinkage rate | MD：3.20mm | 0.20 % |
| Thermal performance | Test Condition | Test Method | CPCHEM NETHERLANDS/R-4-230BL |
|---|---|---|---|
| MD：100到200°C | ASTME831 | 1.5E-05 cm/cm/°C | |
| TD：100到200°C | ASTME831 | 8E-05 cm/cm/°C | |
| TD：-50到50°C | ASTME831 | 4E-05 cm/cm/°C | |
| Linear coefficient of thermal expansion | TD：导热系数 | ASTME831 | 0.31 W/m/K |
| UL temperature rating | UL746B | 200to220 °C | |
| MD：-50到50°C | ASTME831 | 1.5E-05 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火 | ASTMD648 | 265 °C |
Contact Us
Get App
Top