Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TP, Unspecified Edge™ 8 MAIP SRL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | MAIP SRL/Edge™ 8 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C,0.125mm | ASTM D256 | 32 J/m |
| hardness | Test Condition | Test Method | MAIP SRL/Edge™ 8 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 82 |
| Mechanical properties | Test Condition | Test Method | MAIP SRL/Edge™ 8 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 6.0 % |
| bending strength | 屈服 | ASTM D790 | 110 MPa |
| Tensile modulus | ASTM D638 | 2890 MPa | |
| Flexural modulus | ASTM D790 | 3310 MPa | |
| tensile strength | 屈服 | ASTM D638 | 63.0 MPa |
| optical performance | Test Condition | Test Method | MAIP SRL/Edge™ 8 |
|---|---|---|---|
| transmissivity | ASTM D1003 | 93.0 % | |
| Haze ratio | ASTM D1003 | 0.50 % |
| flammability | Test Condition | Test Method | MAIP SRL/Edge™ 8 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| physical property | Test Condition | Test Method | MAIP SRL/Edge™ 8 |
|---|---|---|---|
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 2.5 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.30to0.60 % |
| density | ASTM D792 | 1.06 g/cm³ |
| Thermal performance | Test Condition | Test Method | MAIP SRL/Edge™ 8 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 93.0 °C |
| vicat | ASTM D15252 | 104 °C |
Contact Us
Get App
Top