Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Resiten® G3 Iten Industries
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Iten Industries/Resiten® G3 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 横向流量:3.18mm | ASTM D256 | 520 J/m |
| 流量:1.57mm | ASTM D256 | 500 J/m | |
| 流量:3.18mm | ASTM D256 | 610 J/m | |
| 横向流量:1.57mm | ASTM D256 | 380 J/m |
| Supplementary Information | Test Condition | Test Method | Iten Industries/Resiten® G3 |
|---|---|---|---|
| Viscosity | 1.27cm | ASTM D229 | 590000 g |
| Electrical performance | Test Condition | Test Method | Iten Industries/Resiten® G3 |
|---|---|---|---|
| dielectric strength | 1.57mm | ASTM D149 | 15 kV/mm |
| Dissipation Factor | 3.18mm,1MHz | ASTM D150 | 0.046 |
| dielectric strength | 1.57mm | ASTM D149 | 80000 V |
| 3.18mm | ASTM D149 | 11 kV/mm | |
| dielectric constant | 1.57mm,1MHz | ASTM D150 | 5.04 |
| Dissipation Factor | 3.18mm,1kHz | ASTM D150 | 0.079 |
| 3.18mm,60Hz | ASTM D150 | 0.14 | |
| arc resistance | 3.18mm | ASTM D495 | 184 sec |
| Dissipation Factor | 1.57mm,60Hz | ASTM D150 | 4E-03 |
| 1.57mm,1kHz | ASTM D150 | 5E-03 | |
| dielectric constant | 1.57mm,60Hz | ASTM D150 | 5.43 |
| 1.57mm,1kHz | ASTM D150 | 5.35 | |
| Dissipation Factor | 1.57mm,1MHz | ASTM D150 | 0.017 |
| arc resistance | 1.57mm | ASTM D495 | 185 sec |
| dielectric strength | 1.27cm | ASTM D149 | 17000 V |
| dielectric constant | 3.18mm,1MHz | ASTM D150 | 6.14 |
| dielectric strength | 3.18mm | ASTM D149 | 32000 V |
| dielectric constant | 3.18mm,1kHz | ASTM D150 | 8.02 |
| 3.18mm,60Hz | ASTM D150 | 9.33 |
| Mechanical properties | Test Condition | Test Method | Iten Industries/Resiten® G3 |
|---|---|---|---|
| bending strength | 1.57mm6 | ASTM D790 | 317 MPa |
| compressive strength | 1.57mm9 | ASTM D695 | 348 MPa |
| bending strength | 1.57mm5 | ASTM D790 | 336 MPa |
| tensile strength | 流量:1.57mm | ASTM D638 | 208 MPa |
| bending strength | 3.18mm5 | ASTM D790 | 275 MPa |
| compressive strength | 3.18mm9 | ASTM D695 | 348 MPa |
| bending strength | 3.18mm6 | ASTM D790 | 269 MPa |
| compressive strength | 3.18mm8 | ASTM D695 | 92.4 MPa |
| 3.18mm7 | ASTM D695 | 132 MPa | |
| tensile strength | 横向流量:1.57mm | ASTM D638 | 157 MPa |
| compressive strength | 1.57mm7 | ASTM D695 | 161 MPa |
| 1.57mm8 | ASTM D695 | 105 MPa | |
| bending strength | 12.7mm5 | ASTM D790 | 231 MPa |
| 12.7mm6 | ASTM D790 | 214 MPa |
| flammability | Test Condition | Test Method | Iten Industries/Resiten® G3 |
|---|---|---|---|
| UL flame retardant rating | 12.7mm | UL 94 | V-0 |
| 3.2mm | UL 94 | V-0 | |
| 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Iten Industries/Resiten® G3 |
|---|---|---|---|
| Water absorption rate | 24hr,3.18mm | ASTM D570 | 0.82 % |
| density | --2 | ASTM D792 | 1.75 g/cm³ |
| Water absorption rate | 24hr,1.57mm | ASTM D570 | 0.83 % |
| density | --3 | ASTM D792 | 1.77 g/cm³ |
| --4 | ASTM D792 | 1.96 g/cm³ | |
| Water absorption rate | 24hr,12.7mm | ASTM D570 | 0.65 % |
Contact Us
Get App
Top