Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Copolymer ADDILENE J 220 M20 ADDIPLAST FRANCE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE J 220 M20 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 12 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179/1eA | 13 kJ/m² |
| hardness | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE J 220 M20 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 68 |
| Electrical performance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE J 220 M20 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+14 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+14 ohms | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 0 |
| Mechanical properties | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE J 220 M20 |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 40 % |
| tensile strength | 断裂 | ISO 527-2 | 20.0 MPa |
| 屈服 | ISO 527-2 | 25.0 MPa | |
| Flexural modulus | ISO 178 | 2300 MPa |
| physical property | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE J 220 M20 |
|---|---|---|---|
| density | ISO 1183/A | 1.04 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 3.0 g/10min |
| Thermal performance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE J 220 M20 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/Af | 62.0 °C |
| vicat | ISO 306/A50 | 152 °C | |
| melting temperature | ISO 3146 | 165 °C |
Contact Us
Get App
Top