Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM 9I11230 H 4Plas
--
--
Fillers, reinforcing materials, barium sulfate additives, thermal stabilizer properties, thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | 4Plas/9I11230 H |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 5.0 kJ/m² |
| Tensile strain | 断裂, 23°C | ISO 527-2/5 | 2.0 % |
| Tensile modulus | 23°C | ISO 527-2/5 | 9500 MPa |
| tensile strength | 断裂, 23°C | ISO 527-2/5 | 85.0 MPa |
| Electrical performance | Test Condition | Test Method | 4Plas/9I11230 H |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+14 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+16 ohms |
| other | Test Condition | Test Method | 4Plas/9I11230 H |
|---|---|---|---|
| UL flame retardant rating | 0.750 mm | UL 94 | HB |
| 1.60 mm | UL 94 | HB |
| physical property | Test Condition | Test Method | 4Plas/9I11230 H |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.20 % |
| density | ISO 1183 | 1.57 g/cm³ |
| Thermal performance | Test Condition | Test Method | 4Plas/9I11230 H |
|---|---|---|---|
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 160 °C |
| melting temperature | ISO 11357 | 165 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 155 °C |
Contact Us
Get App
Top