Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM FX-11J MITSUBISHI ENGINEERING JAPAN
Iupital™
Automotive sector,Electronic and Electrical Applications
wear resistant,High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
machinability | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FX-11J |
---|---|---|---|
Mold temperature | 60-80 °C | ||
Processing temperature | 180-210 °C | ||
Screw speed | 80-120 rpm |
thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FX-11J |
---|---|---|---|
Combustibility (rate) | UL 94 | HB | |
Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 1.1E-04 mm/mm.℃ |
mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FX-11J |
---|---|---|---|
Bending modulus | ASTM D790/ISO 178 | 2500 kg/cm²(MPa)[Lb/in²] | |
bending strength | ASTM D790/ISO 178 | 81 kg/cm²(MPa)[Lb/in²] | |
Elongation at Break | ASTM D638/ISO 527 | 25 % | |
Tensile modulus | ASTM D638/ISO 527 | 2700 kg/cm²(MPa)[Lb/in²] |
Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FX-11J |
---|---|---|---|
Arc resistance | ASTM D495/IEC 60112 | 600 | |
Surface resistivity | ASTM D257/IEC 60093 | 1.E+16 Ω | |
Volume resistivity | ASTM D257/IEC 60093 | 1.E+12 Ω.cm |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/FX-11J |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.39 | |
Shrinkage rate | ASTM D955 | 2.1 % | |
Water absorption rate | ASTM D570/ISO 62 | 0.22 % |