Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT KEBATER® PBT A9030 BARLOG plastics GmbH
--
--
Filler, glass fiber reinforced material, 30%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | BARLOG plastics GmbH/KEBATER® PBT A9030 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 8.0 kJ/m² |
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 66 kJ/m² |
Mechanical properties | Test Condition | Test Method | BARLOG plastics GmbH/KEBATER® PBT A9030 |
---|---|---|---|
Tensile strain | 断裂 | ISO 527-2 | 2.5 % |
tensile strength | 断裂 | ISO 527-2 | 145 MPa |
Tensile modulus | ISO 527-2 | 10500 MPa |
Electrical performance | Test Condition | Test Method | BARLOG plastics GmbH/KEBATER® PBT A9030 |
---|---|---|---|
Volume resistivity | IEC 60093 | 1E+19 ohms·cm | |
Surface Resistivity | IEC 60093 | 1E+13 ohms |
flammability | Test Condition | Test Method | BARLOG plastics GmbH/KEBATER® PBT A9030 |
---|---|---|---|
Flammability level | 0.8mm | IEC 60695-11-10,-20 | HB |
physical property | Test Condition | Test Method | BARLOG plastics GmbH/KEBATER® PBT A9030 |
---|---|---|---|
density | ISO 1183 | 1.55 g/cm³ | |
Water absorption rate | 平衡,23°C,50%RH | 内部方法 | 0.15 % |
Thermal performance | Test Condition | Test Method | BARLOG plastics GmbH/KEBATER® PBT A9030 |
---|---|---|---|
melting temperature | ISO 11357-3 | 225 °C | |
Heat distortion temperature | 0.45MPa,未退火,HDT | ISO 75-2/B | 225 °C |
1.8MPa,未退火,HDT | ISO 75-2/A | 205 °C |
Contact Us
Get App
Top