Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK INLUBE PEEKCF15TF15 USA Infinity LTL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | USA Infinity LTL/INLUBE PEEKCF15TF15 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 59 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D256 | 270 J/m |
| hardness | Test Condition | Test Method | USA Infinity LTL/INLUBE PEEKCF15TF15 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 124 |
| Electrical performance | Test Condition | Test Method | USA Infinity LTL/INLUBE PEEKCF15TF15 |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1.0E+2到1.0E+6 ohms |
| Mechanical properties | Test Condition | Test Method | USA Infinity LTL/INLUBE PEEKCF15TF15 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 1.0to3.0 % |
| Flexural modulus | ASTM D790 | 10300 MPa | |
| tensile strength | 屈服 | ASTM D638 | 138 MPa |
| bending strength | ASTM D790 | 262 MPa |
| flammability | Test Condition | Test Method | USA Infinity LTL/INLUBE PEEKCF15TF15 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | USA Infinity LTL/INLUBE PEEKCF15TF15 |
|---|---|---|---|
| Specific volume | 0.681 cm³/g | ||
| Shrinkage rate | MD | ASTM D955 | 0.20to0.30 % |
| Water absorption rate | 24hr | ASTM D570 | 0.10 % |
| density | ASTM D792 | 1.47 g/cm³ |
| Thermal performance | Test Condition | Test Method | USA Infinity LTL/INLUBE PEEKCF15TF15 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 316 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.2E-05 cm/cm/°C |
Contact Us
Get App
Top