Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PEEK 770CA20 JILIN JOINATURE
ZYPEEK®
Aerospace,Electrical field,Electronic field,Electric wire,Cable,Industrial machinery,Medical supplies,Nursing supplies
enhance,Moderate liquidity,standard,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | JILIN JOINATURE/770CA20 |
---|---|---|---|
Hot deformation temperature | 1.8 Mpa | ISO 75-f | 325 °C |
Linear coefficient of thermal expansion | 低于Tg沿着Flow | ISO 11359 | 8 ppm/K |
高于Tg沿着Flow | ISO 11359 | 8 ppm/K | |
Melting temperature | Tg(起始) | ISO 11357 | 143 °C |
specific heat | 23℃ | DSC | 1.8 kJ/kg /℃ |
thermal conductivity | 23℃ | ISO 22007-4 | 0.95 W/m/K |
mechanical properties | Test Condition | Test Method | JILIN JOINATURE/770CA20 |
---|---|---|---|
Bending modulus | 23℃ | ISO 178 | 16000 Mpa |
bending strength | Break,23℃ | ISO 178 | 310 Mpa |
compressive strength | 23℃ | ISO 604 | - Mpa |
Shore hardness | 23℃ | ISO 868 | 86 D 级 |
Tensile strain | Break,23℃ | ISO 527 | 2.1 % |
tensile strength | Break,23℃ | ISO 527 | 210 Mpa |
Electrical performance | Test Condition | Test Method | JILIN JOINATURE/770CA20 |
---|---|---|---|
Volume resistivity | 23 ℃,1V | IEC 60093 | 10^7 ohms·cm |
Physical properties | Test Condition | Test Method | JILIN JOINATURE/770CA20 |
---|---|---|---|
density | 结晶 | ISO 1183 | 1.37 g/cm³ |
melt mass-flow rate | 380℃,5.0kg | ISO 1133 | 4 g/10min |
Shrinkage rate | MD | ISO 294-4 | 0.7 % |
TD | ISO 294-4 | 0.2 % | |
Water absorption rate | 23℃,24hr,3.2 mm厚拉伸棒 | ISO 62-1 | 0.05 % |
Equilibrium,23℃ | ISO 62-1 | 0.4 % |
impact performance | Test Condition | Test Method | JILIN JOINATURE/770CA20 |
---|---|---|---|
Charpy Notched Impact Strength | ISO 179-1eA | 7 kJ/m² | |
Impact strength of cantilever beam gap | ISO 180/A | 8 kJ/m² | |
Impact strength of simply supported beam without notch | ISO 179/1U | 45 kJ/m² | |
Suspended wall beam without notch impact strength | ISO 180/U | 40 kJ/m² |