plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM GB-25 JAPAN POLYPLASTIC
DURACON®
Electronic and electrical components
Low warpage,Glass bead reinforcement,Filler: Glass beads,25% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/GB-25
ColourNumberCF3500/CD3501
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/GB-25
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A110 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method9E-05 cm/cm/°C
TD:23to55°CInternal Method9E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/GB-25
Bending modulusISO 1783800 Mpa
bending strengthISO 178104 Mpa
Friction coefficientDynamic2JISK72180.37
Steel - Dynamic3JISK72180.51
Tensile modulusISO 527-24000 Mpa
Tensile strainBreakISO 527-210 %
tensile strengthISO 527-259.0 Mpa
Wear factor0.060MPa,0.15m/sec4JISK721840 10^-8mm³/N·m
0.49MPa,0.30m/sec5JISK7218500 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72188000 10^-8mm³/N·m
0.49MPa,0.30m/sec6JISK72187000 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/GB-25
Dielectric strength3.00mmIEC 60243-121 KV/mm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/GB-25
densityISO 11831.59 g/cm³
melt mass-flow rate190°C/2.16kgISO 11337.0 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11335.00 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.4 %
MD:2.00mmISO 294-41.7 %
impact performanceTest ConditionTest MethodJAPAN POLYPLASTIC/GB-25
Charpy Notched Impact Strength23°CISO 179/1eA3.4 kJ/m²
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/GB-25
UL flame retardant ratingUL 94HB