Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PBT 5220U 8A9D003 SABIC INNOVATIVE SHANGHAI
XENOY™
chip、Industrial applications、Lawn equipment、Garden equipment、Household goods、Outdoor applications、Electrical field、Electronic field、Architectural application、sporting goods、Electrical appliances、lens、Medical supplies、Nursing supplies、Plastic bag、Automotive sector、Lighting applications、Non specific food、Automotive External Parts
Impact modification、Low temperature impact re、Chemical resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/5220U 8A9D003 |
|---|---|---|---|
| Dart impact | 23°C, Total Energy | ASTM D3763 | 60.0 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/5220U 8A9D003 |
|---|---|---|---|
| tensile strength | 屈服5 | ASTM D638 | 53.0 Mpa |
| elongation | 断裂5 | ASTM D638 | 120 % |
| Tensile modulus | --4 | ASTM D638 | 2250 Mpa |
| Flexural modulus | 50.0 mm 跨距6 | ASTM D790 | 2030 Mpa |
| Tensile modulus | --3 | ASTM D638 | 2250 Mpa |
| elongation | 断裂 | ISO 527-2/50 | 120 % |
| tensile strength | 断裂 | ISO 527-2/50 | 50.0 Mpa |
| Flexural modulus | --7 | ISO 178 | 2000 Mpa |
| tensile strength | 屈服 | ISO 527-2/50 | 50.0 Mpa |
| elongation | 屈服 | ISO 527-2/50 | 4.0 % |
| bending strength | --7,8 | ISO 178 | 80.0 Mpa |
| 屈服, 50.0 mm 跨距6 | ASTM D790 | 84.0 Mpa | |
| elongation | 屈服5 | ASTM D638 | 4.0 % |
| tensile strength | 断裂5 | ASTM D638 | 51.0 Mpa |
| Tensile modulus | -- | ISO 527-2/1 | 2050 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/5220U 8A9D003 |
|---|---|---|---|
| Hot wire ignition (HWI) | UL 746 | PLC 3 | |
| arc resistance | ASTM D495 | PLC 5 | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 0 | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 1 | |
| High arc combustion index (HAI) | UL 746 | PLC 0 |
| other | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/5220U 8A9D003 |
|---|---|---|---|
| characteristic | 紫外线稳定 | ||
| Color | 白色 | ||
| purpose | IT办公 |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/5220U 8A9D003 |
|---|---|---|---|
| UL flame retardant rating | 1.5 mm | UL 94 | HB |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/5220U 8A9D003 |
|---|---|---|---|
| melt mass-flow rate | 250°C/5.0 kg | ISO 1133 | 16 g/10 min |
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.15 % |
| Shrinkage rate | 横向流动 2 | 内部方法 | 0.80 - 1.0 % |
| Outdoor applicability | UL 746C | f2 | |
| Melt volume flow rate | 250°C/5.0 kg | ISO 1133 | 15.0 cm3/10min |
| Specific volume | ASTM D792 | 0.830 cm³/g | |
| Shrinkage rate | 流动 : 3.20 mm | 内部方法 | 0.80 - 1.0 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.50 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/5220U 8A9D003 |
|---|---|---|---|
| Linear coefficient of thermal expansion | 流动 : -40 到 40°C | ASTM E831 | 9.5E-5 cm/cm/°C |
| vicat | -- | ASTM D152511 | 122 °C |
| Linear coefficient of thermal expansion | 横向 : -40°C | ISO 11359-2 | 9.0E-5 cm/cm/°C |
| RTI | UL 746 | 75.0 °C | |
| Heat distortion temperature | 0.45 MPa, 未退火, 6.40 mm，HDT | ASTM D648 | 107 °C |
| vicat | -- | ISO 306/B120 | 125 °C |
| -- | ISO 306/B50 | 120 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火, 6.40 mm，HDT | ASTM D648 | 99.0 °C |
| RTI Imp | UL 746 | 75.0 °C | |
| Linear coefficient of thermal expansion | 横向 : -40 到 40°C | ASTM E831 | 9.0E-5 cm/cm/°C |
| Heat distortion temperature | 1.8 MPa, 未退火, 3.20 mm，HDT | ASTM D648 | 84.0 °C |
| 1.8 MPa, 未退火, 4.00 mm, 64.0 mm 跨距10，HDT | ISO 75-2/Af | 75.0 °C | |
| RTI Elec | UL 746 | 75.0 °C |
| injection | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/5220U 8A9D003 |
|---|---|---|---|
| screw speed | 50 to 80 rpm | ||
| Suggested maximum moisture content | 0.020 % | ||
| Processing (melt) temperature | 260 to 275 °C | ||
| drying temperature | 110 °C | ||
| Suggested injection volume | 50 to 80 % | ||
| drying time | 4.0 to 6.0 hr | ||
| Temperature in the middle of the barrel | 250 to 270 °C | ||
| Temperature at the rear of the barrel | 245 to 265 °C | ||
| Exhaust hole depth | 0.013 to 0.020 mm | ||
| Temperature at the front of the material cylinder | 255 to 275 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| Temperature | 65 to 90 °C | ||
| Spray nozzle temperature | 255 to 270 °C |
Contact Us
Get App
Top