Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MBS 960 INEOS STYRO USA
Zylar®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | INEOS STYRO USA/960 |
|---|---|---|---|
| 23°C | ASTMD256 | 590 J/m | |
| Falling hammer impact | ASTMD5420 | 19.2 J | |
| Impact strength of simply supported beam without notch | 23°C | ISO179 | 无断裂 |
| 23°C | ISO180/A | 15 kJ/m² | |
| ISO180 | 200 kJ/m² |
| hardness | Test Condition | Test Method | INEOS STYRO USA/960 |
|---|---|---|---|
| ISO2039-1 | 35.0 Mpa | ||
| R scale | ISO2039-2 | 62 | |
| R-level | ASTMD785 | 62 |
| Mechanical properties | Test Condition | Test Method | INEOS STYRO USA/960 |
|---|---|---|---|
| fracture | ASTMD638 | 70 % | |
| ASTMD638 | 23.4 Mpa | ||
| ISO527-2 | 28.0 Mpa | ||
| Fracture, 23 ° C | ISO527-2 | 120 % |
| optical performance | Test Condition | Test Method | INEOS STYRO USA/960 |
|---|---|---|---|
| --2 | ASTMD542 | 1.570 | |
| Haze ratio | ASTMD1003 | 2.0 % | |
| transmissivity | 550nm | ASTMD1003 | 91.0 % |
| physical property | Test Condition | Test Method | INEOS STYRO USA/960 |
|---|---|---|---|
| Melt volume flow rate | 200°C/5.0kg | ISO1133 | 6.00 cm3/10min |
| melt mass-flow rate | 200°C/5.0kg | ASTMD1238 | 6.0 g/10min |
| Melt volume flow rate | 220°C/10.0kg | ISO1133 | 65.0 cm3/10min |
| Water absorption rate | 饱和,23°C | ASTMD570,ISO62 | 0.10 % |
| flow | ASTMD955 | 0.20到0.60 % |
| Thermal performance | Test Condition | Test Method | INEOS STYRO USA/960 |
|---|---|---|---|
| 0.45MPa, annealing | ISO75-2/B | 78.0 °C | |
| 1.8MPa, annealing | ISO75-2/B | 86.1 °C | |
| ISO75-2/A | 67.0 °C | ||
| maximum service temperature | 250 °C |
Contact Us
Get App
Top