Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

TPEE 4053FG NC010 DUPONT LUXEMBOURG

BEXLOY®

Automotive Applications,Fitness equipment,electrical equipment,Non specific food applications

Thermal stability,Aging resistance,UV resistance

Plastic Datasheets

hardness	Test Condition	Test Method	DUPONT LUXEMBOURG/4053FG NC010
Shore hardness	ShoreD,15Sec	ISO 868	38

thermal performance	Test Condition	Test Method	DUPONT LUXEMBOURG/4053FG NC010
Effective thermal diffusivity coefficient			5.44E-08 m²/s
Glass transition temperature		ISO 11357-2	-50.0 °C
Linear coefficient of thermal expansion	TD	ISO 11359-2	2.2E-04 cm/cm/°C
Linear coefficient of thermal expansion		MD	ISO 11359-2	2.2E-04 cm/cm/°C
Melting temperature		ISO 11357-3	150 °C

mechanical properties	Test Condition	Test Method	DUPONT LUXEMBOURG/4053FG NC010
Tensile creep modulus	1hr	ISO 899-1	50.0 Mpa
Tensile creep modulus		1000hr	ISO 899-1	40.0 Mpa
Tensile modulus		ISO 527-2	56.0 Mpa
Tensile strain	Break	ISO 527-2	>300 %
tensile strength	5.0%Strain	ISO 527-2	2.40 Mpa
		50%Strain	ISO 527-2	7.30 Mpa
		10%Strain	ISO 527-2	4.10 Mpa
		Break	ISO 527-2	26.0 Mpa

Electrical performance	Test Condition	Test Method	DUPONT LUXEMBOURG/4053FG NC010
Compared to the anti leakage trace index		IEC 60112	PLC 0
Dielectric strength		IEC 60243-1	18 KV/mm
Dissipation factor	1MHz	IEC 60250	0.053
Dissipation factor		100Hz	IEC 60250	0.011
Relative permittivity	100Hz	IEC 60250	5.20
Relative permittivity		1MHz	IEC 60250	4.70
Surface resistivity		IEC 60093	2E+14 ohms
Volume resistivity		IEC 60093	7E+12 ohms·cm

Physical properties	Test Condition	Test Method	DUPONT LUXEMBOURG/4053FG NC010
MediumDensity			1.02 g/cm³
melt mass-flow rate	190°C/2.16kg	ISO 1133	5.3 g/10min
Melt Volume Flow Rate (MVR)	190°C/2.16kg	ISO 1133	5.00 cm3/10min
Shrinkage rate	MD	ISO 294-4	0.20 %
Shrinkage rate		TD	ISO 294-4	0.40 %
Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	0.20 %
Water absorption rate		Saturation,23°C,2.00mm	ISO 62	0.70 %

impact performance	Test Condition	Test Method	DUPONT LUXEMBOURG/4053FG NC010
Impact strength of cantilever beam gap	23°C	ISO 8256/1	230 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	NoBreak

flammability	Test Condition	Test Method	DUPONT LUXEMBOURG/4053FG NC010
Extreme Oxygen Index		ISO 4589-2	20 %
Flammability level	1.5mm	IEC 60695-11-10,-20	HB
FMVSS flammability		FMVSS302	SE
UL flame retardant rating	1.5mm	UL 94	HB

elastomer	Test Condition	Test Method	DUPONT LUXEMBOURG/4053FG NC010
tear strength	Flow	ISO 34-1	110 kN/m

Get App

Top