Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT 5010R8 MITSUBISHI ENGINEERING JAPAN
NOVADURAN™
Bottle cap,Vehicle electronics
Glass fiber reinforced,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010R8 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | >200 kJ/m² |
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010R8 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 1550 Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | >200 % | |
| bending strength | ISO 178 | 56.0 Mpa | |
| Flexural modulus | ISO 178 | 1650 Mpa | |
| Tensile strain | 屈服 | ISO 527-2 | 11 % |
| tensile strength | 屈服 | ISO 527-2 | 45.0 Mpa |
| Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010R8 |
|---|---|---|---|
| dielectric strength | 1.00mm | IEC 60243-1 | 23 KV/mm |
| Volume resistivity | IEC 60093 | 1E+16 ohms·cm | |
| dielectric strength | 2.00mm | IEC 60243-1 | 17 KV/mm |
| relative permittivity | 1MHz | IEC 60250 | 3.40 |
| Surface Resistivity | IEC 60093 | 4E+15 ohms | |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 0 |
| Dissipation Factor | 1MHz | IEC 60250 | 0.025 |
| flammability | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010R8 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| physical property | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010R8 |
|---|---|---|---|
| Shrinkage rate | MD:2.00mm | 2.0 % | |
| TD:2.00mm | 1.9 % | ||
| 吸水率(饱和,23°C) | 0.090 % |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010R8 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：-30to120°C | ISO 11359-2 | 1.4E-04 cm/cm/°C |
| melting temperature | ISO 11357-3 | 222 °C | |
| Linear coefficient of thermal expansion | TD：-30to120°C | ISO 11359-2 | 1.4E-04 cm/cm/°C |
| MD：50to120°C | ISO 11359-2 | 1.7E-04 cm/cm/°C | |
| MD：-30to50°C | ISO 11359-2 | 1.1E-04 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 155 °C |
| Linear coefficient of thermal expansion | TD：50to120°C | ISO 11359-2 | 1.6E-04 cm/cm/°C |
| TD：-30to50°C | ISO 11359-2 | 1.1E-04 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 70.0 °C |
Contact Us
Get App
Top