Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE HD5000S PTT THAI
InnoPlus
Braided wire、Mesh fabric、rope、Charger casing
Good appearance、High toughness
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | PTT THAI/HD5000S |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 170 J/m |
| Supplementary Information | Test Condition | Test Method | PTT THAI/HD5000S |
|---|---|---|---|
| StretchingRatio | 8to10 | ||
| StretchingTemperature | 97to100 °C |
| hardness | Test Condition | Test Method | PTT THAI/HD5000S |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 64 |
| Mechanical properties | Test Condition | Test Method | PTT THAI/HD5000S |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | >1000 % |
| Flexural modulus | ASTM D747 | 834 Mpa | |
| tensile strength | 断裂 | ASTM D638 | 38.2 Mpa |
| 屈服 | ASTM D638 | 28.4 Mpa | |
| Flexural modulus | ASTM D790 | 1180 Mpa |
| physical property | Test Condition | Test Method | PTT THAI/HD5000S |
|---|---|---|---|
| density | ASTM D1505 | 0.954 g/cm³ | |
| Environmental stress cracking resistance | 25%Igepal,F50 | ASTM D1693B | 30.0 hr |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 0.80 g/10min |
| Thermal performance | Test Condition | Test Method | PTT THAI/HD5000S |
|---|---|---|---|
| vicat | ASTM D15253 | 125 °C | |
| melting temperature | ASTM D3418 | 125 °C |
Contact Us
Get App
Top