Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC L-1250Z JIAXING TEIJIN
PANLITE®
Nursing supplies,Disposable tableware,Medical supplies,Electronic field,Electrical field
High temperature resistan,Low temperature resistanc,heat-resisting,transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | JIAXING TEIJIN/L-1250Z |
|---|---|---|---|
| Water absorption rate | 24hr，in 23℃ | ASTM D-570 | 0.2 % |
| Electrical performance | Test Condition | Test Method | JIAXING TEIJIN/L-1250Z |
|---|---|---|---|
| dielectric constant | 60Hz | ASTM D-150 | 2.95 |
| Volume resistivity | ASTM D-257 | 3 1016Ω.cm | |
| dielectric constant | 106Hz | ASTM D-150 | 2.9 |
| Conductive Track Resistance (CTI) | IEC 112 | 300 V | |
| arc resistance | ASTM D-495 | 100 sec | |
| Dielectric loss | 60Hz，正切 | ASTM D-150 | 0.00040 |
| dielectric strength | 快速加压值厚度1.6mm | ASTM D-149 | 30 KV/mm |
| Dielectric loss | 106Hz，正切 | ASTM D-150 | 0.009 |
| Mechanical properties | Test Condition | Test Method | JIAXING TEIJIN/L-1250Z |
|---|---|---|---|
| bending strength | ASTM D-790 | 92(940) Mpa(kgf/cm2) | |
| tensile strength | ASTM D-638 | 80(820) Mpa(kgf/cm2) | |
| Tensile modulus | ASTM D-638 | 2120(21600) Mpa(kgf/cm2) | |
| Rockwell hardness | ASTM D-785 | 77 M标度 | |
| compressive strength | ASTM D-695 | 76(770) Mpa(kgf/cm2) | |
| Impact strength of cantilever beam gap | 艾氏、带缺口厚度6.4mm | ASTM D-256 | 140(14) J/m(kgf·cm/cm) |
| Flexural modulus | ASTM D-790 | 2230(22700) Mpa(kgf/cm2) | |
| Impact strength of cantilever beam gap | 艾氏、带缺口厚度3.2mm | ASTM D-256c | 880(90) J/m(kgf·cm/cm) |
| elongation at break | ASTM D-638 | 140 |
| processability | Test Condition | Test Method | JIAXING TEIJIN/L-1250Z |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.5-0.7 % |
| physical property | Test Condition | Test Method | JIAXING TEIJIN/L-1250Z |
|---|---|---|---|
| UL flame retardant rating | 3.05mm | UL 94 | 94V-2 |
| transmittance | 厚度3mm | ASTM D-1003 | 88 % |
| density | ASTM D-792 | 1.2 | |
| UL flame retardant rating | 1.47mm | UL 94 | 94V-2 |
| refractive index | ASTM D-542 | 1.585 |
| Thermal performance | Test Condition | Test Method | JIAXING TEIJIN/L-1250Z |
|---|---|---|---|
| TEMPERATURE | 厚度1.47mm | UL 746B | 115 °C |
| Heat distortion temperature | 负荷0.451MPa(4.6kgf/cm)，HDT | ASTM D-648 | 142 °C |
| Linear coefficient of thermal expansion | ASTM D-696 | 7 10-5cm/cm/℃ | |
| Heat distortion temperature | 负荷1.813MPa(18.6kgf/cm)，HDT | ASTM D-648 | 132 °C |
Contact Us
Get App
Top