Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 K224-TG9 DSM HOLAND
Akulon® 
wheel、furniture、Shell、power、Tool products、Insulation material
Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDSM HOLAND/K224-TG9
Impact strength of simply supported beam without notch23°CISO 179/1eU100 kJ/m²
-30°CISO 179/1eU95 kJ/m²
Electrical performanceTest ConditionTest MethodDSM HOLAND/K224-TG9
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
dielectric strengthIEC 60243-125 KV/mm
Volume resistivityIEC 600931E+15 ohms·cm
relative permittivity100HzIEC 602503.50
Dissipation Factor100HzIEC 602505E-03
relative permittivity1MHzIEC 602505.20
Surface ResistivityIEC 60093-- ohms
Dissipation Factor1MHzIEC 602500.015
Mechanical propertiesTest ConditionTest MethodDSM HOLAND/K224-TG9
Tensile modulusISO 527-214500 Mpa
Tensile strain断裂ISO 527-23.0 %
tensile strength 断裂ISO 527-2215 Mpa
flammabilityTest ConditionTest MethodDSM HOLAND/K224-TG9
UL flame retardant rating0.75mmIEC 60695-11-10,-20HB
1.5mmIEC 60695-11-10,-20HB
physical property Test ConditionTest MethodDSM HOLAND/K224-TG9
Shrinkage rateTDISO 294-40.95 %
MDISO 294-40.15 %
Water absorption rate平衡,23°C,50%RHISO 621.5 %
饱和,23°CISO 625.0 %
Thermal performanceTest ConditionTest MethodDSM HOLAND/K224-TG9
melting temperatureISO 11357-3220 °C
Heat distortion temperature0.45MPa,未退火,HDTISO 75-2/B220 °C
1.8MPa,未退火,HDTISO 75-2/A210 °C
Linear coefficient of thermal expansionMDISO 11359-22E-05 cm/cm/°C
TDISO 11359-25E-05 cm/cm/°C

Contact Us

Get App

Top